Sony VLP-CH350 Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 82

background image

53

Indicators

Ot
h

e

rs

B

Others

Indicators

The indicators allow checking the status and notify you of abnormal operation of the projector.
If the projector exhibits abnormal status, address the problem in accordance with the table
below.

ON/STANDBY indicator

LAMP/COVER indicator

Status

Meaning/Remedies

Lights in red

The projector is in Standby mode.

Flashes in green

• The projector is ready to operate after having been turned on.
• The lamp cools after the projector is turned off.

Lights in green

The projector’s power is on.

Lights in orange

The projector is in With No Input (Lamp Cutoff) or when the Speaker
Setting is set to “Always On.”

Flashes in red

The projector is in abnormal status. Symptoms are indicated by
number of flashes. Address the problem in accordance with the
following. If the symptom is shown again, consult with qualified Sony
personnel.

Flashes twice

The internal temperature is unusually high. Check the items below.
• Check if nothing is blocking the ventilation holes. (pages 4, 4)
• Check if the air filter is not clogged. (page 60)
• Check if the Installation Attitude in the Installation menu is set

correctly. (page 34)

Flashes six times

Unplug the AC power cord from a wall outlet. After checking that the
ON/STANDBY indicator goes out, plug the power cord to a wall
outlet again then turn on the projector.

Other number of
flashes

Consult with qualified Sony personnel.

Status

Meaning/Remedies

Flashes in red

Symptoms are indicated by number of flashes. Address the problem in
accordance with the following.

Flashes twice

The lamp cover is not attached securely. (page 58)

Flashes three times The temperature of the lamp is unusually high. Turn off the projector

and turn it on again after the lamp has cooled. If the same symptom
occurs, turn off the projector again and remove the lamp (page 58),
then check if the lamp is not broken.
If the lamp is not broken, reattach the lamp and turn on the projector
again.
If the symptom occurs again, the lamp may be exhausted. In this case,
replace the lamp with a new one (page 58).
If the lamp is broken, do not exchange the lamp by yourself. Consult a
qualified Sony consultant.

«
...
51
52
53
54
55
...
»

Содержание VLP-CH350



















































































Отзывы:

Нет отзывов

Похожие инструкции для VLP-CH350

Бренд: ACDC DCAC Страницы: 2

Бренд: Patton electronics Страницы: 8

Бренд: Avio Страницы: 3

Бренд: M-system Страницы: 4

Бренд: OPTRONIC Страницы: 10

Бренд: Sinew Страницы: 44

CineTheatre Galleria Curve

Бренд: LP Morgan Страницы: 20

TheaterLite DXG-210

Бренд: Zenith Страницы: 13

Бренд: Optoma Страницы: 1

Precision VS11856

Бренд: Precision Страницы: 60

Бренд: BenQ Страницы: 32

Бренд: Yaber Страницы: 19

TX-51GF85 series

Бренд: Panasonic Страницы: 60

Бренд: Panasonic Страницы: 100

Бренд: Panasonic Страницы: 132

PTD7600U - DLP PROJECTOR

Бренд: Panasonic Страницы: 112

Бренд: Panasonic Страницы: 138

Бренд: Panasonic Страницы: 220

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды