Sony VGN-TX3HP/W Скачать руководство пользователя страница 54

Страница: 54 / 194

Using Your VAIO Computer

Inserting a Memory Card

To insert a memory card

Locate the SD memory card slot on the front of the computer.

Hold the memory card with the arrow facing upward and pointing toward the memory card slot.

Carefully slide the memory card into the slot until it clicks into place.
Do not force the card into the slot.

✍

If the memory card does not go into the slot easily, remove it gently and verify you are inserting it in the proper direction.

Removing a Memory Card

Do not remove a memory card while the

Media Access

indicator light is on. The card or its data may become damaged.

To remove a memory card

Check that the Media Access indicator is off.

Press the extended part of the memory card, causing it to extend out from the slot.

When the card extends, carefully pull it out of the slot.

Содержание VGN-TX3HP/W



































































































































































































Результаты поиска

Содержание VGN-TX3HP/W

Отзывы:

Похожие инструкции для VGN-TX3HP/W

Бренды по названию

Популярные бренды

Sony VGN-TX3HP/W, Руководство пользователя

Результаты поиска

Содержание VGN-TX3HP/W

Отзывы:

Похожие инструкции для VGN-TX3HP/W

Бренды по названию

Популярные бренды