Sony VGN-CS2, Руководство пользователя

Страница: 165 / 191

165 n N
Troubleshooting
What should I do if I cannot play a disc properly on my computer?
❑
Make sure the disc is inserted into the optical disc drive with the label facing upward.
❑
Make sure the necessary program(s) is installed according to the manufacturer's instructions.
❑
If a disc is dirty or damaged, your computer will stop responding. Follow these steps:
1 Press the Ctrl + Alt + Delete keys and click the arrow next to the Shut down button and Restart to restart the computer.
2 Remove the disc from the optical disc drive.
3 Check the disc for dirt or damage. If you need to clean the disc, see Handling Discs (page 135) for instructions.
❑
If you are playing a disc and cannot hear sound, do any of the following:
❑
The volume may have been turned off by (the touch sensor button) or the Fn+F2 keys. Press twice or the
Fn+F2 keys once again.
❑
The volume may have been minimized by (the touch sensor button) or the Fn+F3 keys. Press (the touch sensor
button) several times or keep pressing or the Fn+F4 keys to turn up the volume loud enough to hear sound.
❑
Right-click the volume icon on the taskbar and click Open Volume Mixer to check the settings.
❑
Check the volume setting in the audio mixer.
❑
If you are using external speakers, check the volume settings on the speakers and the connections between the
speakers and your computer.
❑
Make sure the correct driver software is installed. Follow these steps:
1 Click Start and Control Panel .
2 Click System and Maintenance .
3 Click System .