Sony VGN-BX194VP Скачать руководство пользователя страница 173

Страница: 173 / 182

173

Troubleshooting

Movie playback shows dropped frames when my computer is running on the battery

The battery is running out of power. Connect the computer to an AC power source.

The video input from the built-in MOTION EYE camera is suspended for a few seconds

The video input may be suspended for a few seconds if

❑

a shortcut key with the Fn key is used.

❑

the CPU load increases.

This is normal and does not indicate a malfunction.

I cannot use the built-in MOTION EYE camera

❑

The built-in MOTION EYE camera cannot be shared by more than one software application. If another software
application is using the camera, exit the application before using the built-in MOTION EYE camera.

❑

If the problem persists, you must reinstall the driver software for the camera. Proceed as follows to reinstall the driver
software.

Click Start and then Control Panel.

Click the Performance and Maintenance icon.

Click the System icon.

Click Device Manager on the Hardware tab.

Double-click Imaging devices.

Right-click Sony Visual Communication Camera VGP-VCC1 and click Update Driver.

Содержание VGN-BX194VP























































































































































































Результаты поиска

Содержание VGN-BX194VP

Отзывы:

Sony VGN-BX194VP, Руководство пользователя, Страница: 173 / 182

Результаты поиска

Содержание VGN-BX194VP

Отзывы: