Sony VGC-LM2E, Руководство по устранению неисправностей

Страница: 9 / 44

Troubleshooting
9
What should I do if a BIOS error appears when I turn
on my computer?
If the message “Press <F1> to resume, <F2> to setup” appears at the bottom
of the screen, follow these steps:
1 Press the F2 key.
The BIOS setup screen appears. If not, restart the computer and press
the
F2 key several times when the VAIO logo appears.
2 Set the date (month/day/year). Press the Enter key.
3 Press the
m
key to select System Time , and then set the time (hour:
minute: second). Press the Enter key.
4 Press the
,
key to select the Exit tab, and then press the F9 key.
At the confirmation prompt, press the Enter key.
5 Select Exit Setup , and press the Enter key.
At the confirmation prompt, press the Enter key.
Your computer restarts.
If this occurs frequently, contact VAIO-Link.
What should I do if the power indicator (Green)
lights but my screen remains blank?
Follow these steps:
1 Press and hold the power button for more than four seconds to check that
the power indicator goes out. Then turn on your computer again.
2 If your computer screen still remains blank, unplug the AC adapter,
remove the battery pack, and leave the computer for about a minute.
Then reinstall the battery pack, plug in the AC adapter, and turn on the
computer again.