Sony VBD-MA1, Руководство по эксплуатации

Страница: 53 / 84

53
C
o
py
in
g P
h
o
tos
If you select copy mode [Select Photos] in
step 2 (page 51), select [Thumbnail] or
[Shooting Date].
1
Press V or v to select [Thumbnail]
or [Shooting Date] and press the
ENTER button.
2
Press B / V / v / b to select the
viewing thumbnail or shooting
date you want to copy and press
the ENTER button to mark.
Pressing the ENTER button toggles the
selection between marked and
unmarked.
A
Marked photo to copy
B
[ ]
Displays which photo is 3D (.mpo file)
format.
C
[ ]
Displays which photo is RAW (.arw
file) format.
D
Shooting date
3
Press the (record) button to
start recording.
This unit starts the recording process.
For serial procedure, follow after step 3,
on page 52.
If the contents do not fit onto a single
disc
The number of discs required and
confirming message will appear. Select
[Yes] to start recording contents.
z Hint
• If you press the (stop) button when
thumbnails are displayed, the photo selected
will be displayed in full. The photo can be
rotated 90 degrees right with each press of
b .
The photo can be rotated 90 degrees left with
each press of
B (JPEG photo only).
b
Notes
• Some photo files cannot be displayed as
thumbnail images. In that case, is
displayed.
• It takes time to display thumbnail images if
there are many photos.
• If a 3D photo (or RAW format photo) and JPEG
file have a same number, such as
“DSC001.mpo” (or “DSC001.arw”) file and
“DSC001.jpg” file, only one photo will be
displayed as a thumbnail. However, both the 3D
photo (or RAW format photo) and JPEG file are
copied.
To copy photos selected by
[Select Photos]