119
Precautions >
Handling the Built-in Storage Device
Handling the Built-in Storage Device
The built-in storage device (hard disk drive or solid state drive) has a high storage density and reads or writes data in a short
time. However, it can be easily damaged if improperly used. If the built-in storage device is damaged, the data cannot be
restored. To prevent losing data, you should be careful when handling your computer.
Some features and options in this section may not be available on your computer.
See the specifications to find out about the configuration of your computer.
To avoid damaging your hard disk drive
❑
Do not subject your computer to sudden movements.
❑
Keep your computer away from magnets.
❑
Do not place your computer in a location subject to mechanical vibration or in an unstable position.
❑
Do not move your computer while the power is on.
❑
Do not turn off the power or restart your computer while reading or writing data to the hard disk drive.
❑
Do not use your computer in a place subject to extreme changes in temperature.
❑
Do not remove the hard disk drive from your computer.
To avoid damaging your solid state drive
❑
Do not turn off the power or restart your computer while reading or writing data to the solid state drive.
❑
Do not remove the solid state drive from your computer.
Содержание VAIO VPCF11 Series
Страница 1: ...N User Guide Personal Computer VPCF11 Series ...
Страница 169: ... 2010 Sony Corporation n ...