English
WARNING
To prevent fire or shock hazard, do not expose the unit
to rain or moisture.
Owner’s Record
The model number and the serial number are located inside the battery
compartment of the mouse. Record the serial number in the space provided
below. Refer to this number whenever you call your Sony dealer regarding this
product.
Model No. VGP-BMS33
Serial No. ____________________
For customers in the U.S.A.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly approved in
this manual could void your authority to operate this equipment.
For questions regarding your product or for the Sony Service Center nearest you,
call 1-888-476-6972 in the United States or 1-800-961-7669 in Canada.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
FCC Radiation Exposure Statement:
These products comply with FCC radiation exposure limits set forth for
uncontrolled equipment and meet the FCC radio frequency (RF) Exposure
Guidelines in Supplement C to OET65. These products have very low levels
of RF energy that it is deemed to comply without testing of specific
absorption ratio (SAR).
For customers in Canada
This Class B digital apparatus complies with Canadian ICES-003.
Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation of the device.
To prevent radio interference to the licensed service, this device is intended
to be operated indoors and away from windows to provide maximum
shielding. Equipment (or its transmit antenna) that is installed outdoors is
subject to licensing.
IC Exposure of Humans to RF Fields
The installer of this radio equipment must ensure that the antenna is
located or pointed such that it does not emit RF field in excess of Health
Canada limits for the general population; consult Safety Code 6, obtainable
from Health Canada’s website:
www.hc-sc.gc.ca/rpb.
For customers in the U.S.A. and Canada
The use of optical instruments with this product will increase eye hazard.
Located on bottom side
For customers in Europe
Hereby, Sony, declares that this product is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
It also complies with standard EN 60825-1, being classified as a CLASS 1
Laser product.
Located on bottom side
To obtain a copy of the Declaration of Conformity (DoC) to the R&TTE
Directive, please access the following URL address.
http://www.compliance.sony.de/
Do not open wireless devices, as opening them, for whatever reason, could
lead to damages that are not covered by the guarantee.
Repair and maintenance only by authorized Sony technicians. Improper use
and repairs can create a safety hazard.
In some situations or environments, the use of Bluetooth
®
wireless
technology might be restricted by the proprietor of the building or
responsible representatives of the organization, for example onboard
airplanes, in hospitals or in any other environment where the risk of
interference with other devices or services is perceived or identified as
harmful.
If you are uncertain of the policy that applies to the use in a specific
organisation or environment, you are encouraged to ask for authorization
to use Bluetooth
®
wireless technology prior to switching it on.
Consult your physician or the manufacturer of personal medical devices
(pacemakers, hearing aids, etc.) regarding any restrictions on the use of
Bluetooth
®
wireless technology.
Disposal of AA batteries
• This wireless device is powered by AA batteries.
• For installing the batteries, please refer to the “Inserting Batteries into the
Mouse” section of this manual.
• Do not handle damaged or leaking batteries. Dispose of promptly and
properly.
• Batteries may explode or leak if recharged, disposed of in fire, mixed
with other types of battery or improperly installed.
• Batteries used in these devices may present a fire or chemical burn
hazard if mistreated. Do not disassemble, heat above 60°C (140°F) or
incinerate.
• Replace only with the same or equivalent type recommended by the
manufacturer.
• Keep away from children.
• Dispose of properly at end-of-life.
• In some areas, the disposal of batteries in household or business waste
may be prohibited. Please use the appropriate public collection system.
Disposal of Old Electrical & Electronic Equipment
(Applicable in the European Union and other European
countries with separate collection systems)
This symbol on the product or on its packaging indicates that
this product shall not be treated as household waste. Instead it
shall be handed over to the applicable collection point for the
recycling of electrical and electronic equipment. By ensuring
this product is disposed of correctly, you will help prevent
potential negative consequences for the environment and
human health, which could otherwise be caused by
inappropriate waste handling of this product. The recycling of
materials will help to conserve natural resources. For more
detailed information about recycling of this product, please
contact your local Civic Office, your household waste disposal
service or the shop where you purchased the product.
• VAIO and
are trademarks of Sony Corporation.
• Microsoft, Windows, and Windows Vista are registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other
countries.
• The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc., and
any use of such marks by Sony Corporation is under license. Other
trademarks and Trade names are those of their respective owners.
• All other names of systems, products, and services are trademarks of their
respective owners. In this manual, the ™ or ® marks are not specified.
• In this manual, Microsoft
®
Windows
®
XP Home Edition and Microsoft
®
Windows
®
XP Professional are referred to as Windows XP.
• In this manual, Microsoft
®
Windows Vista™ Home Basic, Microsoft
®
Windows Vista™ Home Premium, Microsoft
®
Windows Vista™ Business and
Microsoft
®
Windows Vista™ Ultimate are referred to as Windows Vista.
Before Use
This product is a laser mouse equipped with Bluetooth* technology.
The Bluetooth
®
Laser Mouse can be used with the following personal
computers (as of January 2007):
• Sony VAIO personal computers equipped with Bluetooth technology and
pre-installed with Microsoft
®
Windows
®
XP Professional, Microsoft
®
Windows
®
XP Home Edition, or Microsoft
®
Windows Vista™.
(SP2 must be installed on your personal computer if it is
pre-installed with Windows XP.)
* Bluetooth
®
technology
Bluetooth wireless technology provides instant short-range connectivity
without the need for cumbersome cabling. For details, refer to the
manuals included with your personal computer.
Note
Depending on the personal computer or version of software you are using, the
mouse may not operate correctly.
Consult your nearest Sony dealer about proper operating environments and
information about Sony VAIO and Bluetooth compatibility.
Names of Parts
Inserting Batteries into the
Mouse
1
Set the power switch located on the bottom of the
mouse to OFF.
2
Open the battery compartment cover.
3
Insert the two supplied IEC R6 (size AA) batteries with
the c - orientation.
Note
To prevent battery fluid leaks and damage, observe the following
precautions.
• Insert the batteries with the c - orientation.
• Do not charge dry cell batteries.
• Do not mix old and new batteries, or batteries of a different type.
• If the mouse has not been used for a long time, remove the batteries.
• If a battery fluid leak occurs, carefully wipe the battery compartment,
and insert new batteries.
• To prevent accidental operation, be careful not to press any buttons
when replacing the batteries.
4
Close the battery compartment cover.
z
Under normal operating conditions, a set of alkaline batteries lasts about
three months. When cursor movement becomes sluggish and the
communication distance between the mouse and your personal computer
decreases, check the low battery lamp on the mouse. Replace the batteries if
the low battery lamp is flashing red.
When not using the mouse, set the power switch to OFF. This will make the
batteries last longer.
Replacing the batteries
The low battery lamp flashing red indicates that the battery life is running
low. Replace the batteries when this occurs.
Enabling Communication
between the Mouse and Your
Personal Computer
Use the Bluetooth Utility software installed on your personal computer to
enable communication between the mouse and your personal computer.
z
Hint
Operation of the Bluetooth Utility software may vary depending on your
personal computer. For details on how to use the software, refer to the manuals
provided with your personal computer.
Using the Bluetooth Utility software to
enable communication
1
Turn your personal computer on.
2
Set the power switch located on the bottom of the
mouse to ON.
3
Activate the wireless function on your personal
computer.
For details, refer to the operating instructions and manuals provided
with your personal computer.
4
Double-click the
icon in the notification area on the
bottom right corner of your personal computer’s
desktop.
The Bluetooth Utilities software starts up, and the “Bluetooth Settings”
screen displays.
5
Click “New Connection”.
The “Add New Connection Wizard” screen appears.
6
Press the CONNECT button on the bottom of the mouse.
The low battery lamp flashes green.
7
Select “Express Mode”, and click “Next”.
Search for Bluetooth devices begins.
8
In the device list, select “VGP-BMS33”, and click “Next”.
When your personal computer is pre-installed with Windows
Vista:
The “Add New Connection Wizard” screen disappears. Try moving
the mouse. If the pointer displayed on your screen moves in the same
direction, the connection is complete.
When your personal computer is pre-installed with Windows XP:
Go to step
9
.
9
Click “OK” at the prompt to connect the HID device.
10
Verify the contents of the window displayed, and click
“Next”.
11
Click “Finish”.
Try moving the mouse. If the pointer displayed on your screen moves
in the same direction, the connection is complete.
Disconnecting
Right click the headset icon displayed in the “Bluetooth Settings” screen,
and click “Disconnect” in the displayed menu.
Operating distance of the mouse
The mouse can normally be operated within about a 32 ft. (10 m) radius around
the personal computer. Depending on the usage environment, sometimes the
usable distance may be notably shorter, preventing normal operation.
In such a case, take the following measures:
• Use the mouse as far away from other wireless devices as possible.
• Use the mouse closer to the personal computer.
• Use a mouse pad.
Using the Mouse
When you move the mouse, the pointer displayed on your screen moves in
the same direction. This section describes basic mouse operations.
Notes
• Due to the characteristics of the laser sensor, the mouse may not work
properly on transparent surfaces or on a mouse pad that has a clear surface.
Avoid using on such materials, or use a commercially-available mouse pad
that is compatible with a laser sensor mouse.
• The fluoropolymer used for the soles of the mouse (PTFE, or
polytetrafluoroethylene) is designed for low frictional resistance, but the
mouse may slide differently depending on what material your desk or
mousepad is made of.
z
If necessary, you can adjust the mouse pointer speed under “Mouse Properties”. To
display “Mouse Properties”, with the Windows Vista operating system, double-
click “Mouse” in the “Control Panel” (with the Windows XP operating system,
select “Printers and Other Hardware” in the “Control Panel”, then select “Mouse”).
Basic operations
1
3
2
1
Wheel button
Use the wheel button to easily scroll up and down in a window. You can
also use auto scroll by pressing the wheel button.
2
Left button
Use to open saved documents, pictures and other files and to run programs.
Most mouse functions are performed using this button.
3
Right button
Use this button to display shortcut menus that allow you to copy saved
documents, pictures and other files, view file details, and access various
commands and settings.
Precautions
Safety
If any solid object or liquid falls onto the mouse, disconnect
it and have it checked by qualified personnel before
continuing its use.
Location
Do not place the mouse in a location where it is:
• On an unstable surface
• In very humid areas or where there is no ventilation
• Subject to excessive dust
• Subject to direct sunlight or extreme heat
• Extremely cold
Operation
If the mouse is brought directly from a cold to a warm
location or is placed in a very damp room, moisture may
condense on the inside of the mouse. If this occurs, the
mouse may not work properly.
In this case, wait about 30 minutes for the moisture to
evaporate. If the mouse does not work properly after one
hour, consult your nearest Sony dealer.
Bluetooth communications
• The 2.4 GHz band used by Bluetooth and wireless LAN devices is also
used by various other devices. Bluetooth devices incorporate technology
that minimizes interference from other devices using the same
wavelength. However, communication speed and achievable distances
may be reduced. Interference from other devices can also stop
communications altogether.
• The data transfer rate will vary depending on distance and obstacles
between devices, device configuration, radio interference, operating
system, software application, and so on. In some cases, communication
may be interrupted.
• Communication range will vary according to whether walls or other
obstacles are located between devices, the material used in walls, the
presence of radio frequency interference and other environmental
conditions, and the type of software being used.
• If wireless LAN and Bluetooth functionality are used at the same time on
the same personal computer, communication speed may be reduced due
to electromagnetic interference, and other unwanted effects may occur.
Cleaning the outside of the mouse
Clean the mouse with a soft, dry cloth or a soft cloth lightly moistened with
a mild detergent solution. Do not use any type of abrasive pad, scouring
powder, or solvent such as alcohol or benzine.
Specifications
Communication method
Bluetooth Standard Ver. 2.0+EDR
Position tracking principle
Laser sensor
Resolution
800 counts per inch
Frequency band
RF 2.4 GHz (Bluetooth)
Power requirements
3 V DC (two alkaline IEC R6 [size AA]
batteries)
Transmission distance
32 ft. (10 m) max. line of sight*
1
Dimensions
Approx. 2.1
×
1.2
×
4.9 in.
(53.4
×
31.5
×
124.6 mm) (w
×
h
×
d)
Mass
Approx. 3.9 oz. (110 g) (including batteries)
Supported models
Sony VAIO personal computers with the
Windows XP or Windows Vista operating
system
Operating temperature
41°F to 95°F (5°C to 35°C)
(temperature gradient less than 18°F (10°C)/
hour)
Operating humidity
20% to 80% (not condensed), provided that
humidity is less than 65% at 95°F (35°C)
(hygrometer reading of less than 84°F (29°C))
Storage temperature
–4°F to 140°F (–20°C to 60°C)
(temperature gradient less than 18°F (10°C)/
hour)
Storage humidity
10% to 90% (not condensed), provided that
humidity is less than 20% at 140°F (60°C)
(hygrometer reading of less than 95°F (35°C)
Accessories
Alkaline IEC R6 (size AA) batteries (2)
Operating Instructions (this document) (1)
Warranty Card (1)
Bluetooth
®
Laser Mouse
VGP-BMS33
Operating Instructions
Mode d’emploi
© 2007 Sony Corporation Printed in Japan
3-095-039-
11
(1)
*
1
Communication range will vary according to whether walls or other
obstacles are located between devices, the material used in walls, the
presence of radio frequency interference and other environmental
conditions, and the type of software being used.
Design and specifications are subject to change without notice.
Troubleshooting
If you experience any of the following difficulties while using the mouse,
use this troubleshooting guide to solve the problem. If a problem persists,
consult your nearest Sony dealer.
The mouse does not turn on when I set the power switch to ON.
❒
Your personal computer is in power-saving mode or is not turned on.
c
Unless your personal computer is turned on and not running in power-
saving mode, the mouse will not turn on, even when the power switch is
set to ON. To turn the mouse on, set the power switch on the mouse to
ON, and press the CONNECT button once.
❒
Other mouse buttons are being pressed while the power switch is set to
ON.
c
If the power switch is set to ON while other mouse buttons are being
pressed, the mouse will not turn on. Be sure not to press any other
buttons when setting the power switch to ON.
Nothing happens when I press a mouse button.
❒
The software is not compatible.
c
Use a supported software.
❒
The mouse batteries are exhausted.
c
Replace the batteries. For details, see “Inserting Batteries into the Mouse”.
❒
The mouse and the personal computer are not communicating.
c
Perform the steps in “Enabling Communication between the Mouse and
Your Personal Computer” to ensure that proper communication is
possible.
c
Turn off the mouse, wait a few seconds, turn on the mouse, and then
reestablish communication.
c
In some operating environments, the usable distance may be notably
shorter, preventing normal operation. In such case, use the mouse farther
away from other electronic devices such as other computers and displays.
c
If the mouse is too far from your personal computer, communication is
not possible. Bring the mouse and your personal computer closer
together.
❒
The mouse is being used on an unsuitable surface.
c
Due to the characteristics of the laser sensor, the mouse may not work
properly on transparent surfaces or on a mouse pad that has a clear
surface. Avoid using on such materials, or use a commercially-available
mouse pad that is compatible with a laser sensor mouse.
❒
The CONNECT button is pressed while operating the mouse.
c
When the CONNECT button is pressed while operating the mouse, the
mouse goes into a standby state for about 1 minute and cannot be
operated during this time. If you press the CONNECT button, wait a few
minutes before beginning operation.
❒
The mouse may have difficulty communicating in an environment with
2.4 GHz wireless LAN or other Bluetooth communication.
c
It is best to use the mouse in a location with low interference from
wireless devices.
Pressing the CONNECT button does not establish a connection.
c
Check whether batteries are inserted in the mouse. For details, see
“Inserting Batteries into the Mouse”.
c
If the power switch on the mouse is set to OFF, communication with
the personal computer is not possible. Check the power switch setting
on the bottom of the mouse.
c
If the power does not come on when the power switch is set to ON, the
batteries may be exhausted. Under normal operating conditions, a set
of alkaline batteries lasts about three months. Replace the batteries. For
details, see “Inserting Batteries into the Mouse”.
c
Communication between the mouse and your personal computer may
not have been properly established. If the CONNECT button on the
mouse is not pressed within 30 seconds after the Bluetooth device
search begins, mouse communication is canceled. In such a case,
perform the procedure again to enable communication. For details, see
“Enabling Communication between the Mouse and Your Personal
Computer”.
c
If the mouse and personal computer are too far apart, communication
is not possible. The maximum communication distance between the
mouse and personal computer is about 32 ft. (10m). If used on a metal
table or if obstacles lie between the mouse and personal computer, the
usable distance may be less.
The scrolling features do not work.
❒
The operating system is not compatible.
c
Use a supported operating system.
❒
The program you are using is not compatible with the scrolling
features.
c
The scrolling features only work with programs that use a scroll function.
c
Some programs do not support the scrolling features.
The pointer does not move when I move the mouse.
c
Processing performed by Windows or other software may temporarily
disable the mouse. Wait a few moments for the processing to finish
before using the mouse.
c
You may find some useful solutions in your personal computer’s
operating instructions. Refer to the manuals provided with your
personal computer.
❒
The mouse batteries are exhausted.
c
If the power does not come on when the power switch is set to ON,
replace the batteries. For details, see “Inserting Batteries into the Mouse”.
❒
The mouse is not set to ON.
c
Set the power switch on the bottom of the mouse to ON.
❒
The mouse and your personal computer are not communicating.
c
Perform the steps in “Enabling Communication between the Mouse and
Your Personal Computer” to ensure that proper communication is
possible.
c
In some operating environments, the usable distance may be notably
shorter, preventing normal operation. In such case, use the mouse farther
away from other electronic devices such as other computers and displays.
c
If the mouse is too far from your personal computer, communication is
not possible. Bring the mouse and your personal computer closer
together.
❒
The mouse is being used on an unsuitable surface.
c
Due to the characteristics of the laser sensor, the mouse may not work
properly on transparent surfaces or on a mouse pad that has a clear
surface. Avoid using on such materials, or use a commercially-available
mouse pad that is compatible with a laser sensor mouse.
When I am using the mouse, the display goes dark or the personal
computer enters power-saving mode.
❒
The personal computer enters power-saving mode even while the
mouse is in use.
c
Change the power management settings for the personal computer to
prevent it from entering power-saving mode. For details, refer to the
manuals provided with your personal computer.
c
Touch the touchpad or press any key on the keyboard to exit power-
saving mode.
The personal computer does not return from Standby mode.
c
Touch the touchpad or press any key on the keyboard to exit this mode.
The mouse pointer does not move smoothly across the screen.
c
Due to the characteristics of the laser sensor, the mouse may not work
properly on transparent surfaces or on a mouse pad that has a clear
surface. Avoid using on such materials, or use a commercially-available
mouse pad that is compatible with a laser sensor mouse.
Exiting power-saving mode with the mouse takes a long time or is not
possible.
c
Press any key or the power button on the keyboard.
The mouse does not move smoothly after returning from the power-
saving mode.
c
Deactivate the Bluetooth connection, wait a few seconds, and then
reestablish connection.
The mouse is not found when the Bluetooth device search is
performed.
❒
The mouse is unable to be detected.
c
Press the CONNECT button located on the bottom of the mouse, and
then try the search again.
❒
The power switch on the mouse is set to OFF.
c
Check the power switch setting on the bottom of the mouse.
I am asked to input a key at the time of authentication.
c
Input “0000” as the key.
Printed on 70% or more recycled paper using VOC (Volatile
Organic Compound)-free vegetable oil based ink.
Imprimé sur papier recyclé à 70% ou plus avec de l’encre à
base d’huile végétale sans COV (composés organiques volatils).
Low battery lamp
Left button
CONNECT button
Power switch
Right button
Wheel button
Lens
Low battery lamp
