Sony Vaio VGN-FE31B Скачать руководство пользователя страница 59

Страница: 59 / 218

Using Your VAIO Computer

Using PC Cards

PC Cards allow you to connect portable external devices to your computer.

Inserting a PC Card

Some PC Cards or their functions may not be compatible with your computer.

You do not need to shut down your computer before inserting or removing a PC Card.

To insert a PC Card

Push the PC Card release button so that the release button pops out.

Push the PC Card release button a second time so that the PC Card slot protector pops out.

Gently take hold of the protector and pull it out of the slot.

Insert the PC Card into the PC Card slot with the front label facing upward.

Gently push the PC Card into the slot.
The PC Card is automatically detected by your system.
The Safely Remove Hardware icon appears on the taskbar.

Содержание Vaio VGN-FE31B



























































































































































































































Результаты поиска

Содержание Vaio VGN-FE31B

Отзывы:

Sony Vaio VGN-FE31B, Руководство пользователя, Страница: 59 / 218

Результаты поиска

Содержание Vaio VGN-FE31B

Отзывы: