Sony Vaio VGN-AR31E Скачать руководство пользователя страница 62

Страница: 62 / 212

Using Your VAIO Computer

Removing a PC Card

Follow the steps below to remove the PC Card while your computer is on. If it is not removed properly, your system may not
work properly.

To remove a PC Card

✍

To remove a PC Card when your computer is off, skip steps 1 to 7.

Double-click the Safely Remove Hardware icon on the taskbar.
The Safely Remove Hardware window appears.

Select the hardware you want to unplug.

Click Stop.
The Stop a Hardware device window appears.

Confirm that the device can be safely removed from the system.

Click OK.
A message appears stating it is now safe to remove the hardware device.

Click OK.

Click Close to close the Safely Remove Hardware window.

Push the PC Card release button so that the release button pops out.

Push the PC Card release button a second time so that the PC Card pops out.

10 Gently take hold of the Card and pull it out of the slot.

11 If the PC Card release button is still out, push it back in all the way to the end.

Содержание Vaio VGN-AR31E





















































































































































































































Результаты поиска

Содержание Vaio VGN-AR31E

Отзывы:

Бренды по названию

Популярные бренды

Sony Vaio VGN-AR31E, Руководство пользователя

Результаты поиска

Содержание Vaio VGN-AR31E

Отзывы:

Бренды по названию

Популярные бренды