TOP
EXPLODED VIEWS
CAUTION
DISASSEMBLY
FRAME HARNESS
13
VGC-RA Series (AM)
Confidential
Procedure to remo
v
e
FLOWCHART
grease (in the surface at the splatter)
1
Eject the lever in the direction
of arrow.
2
CPU
2
1
CPU (MOTHER BOARD: MU2)
Note : When heat sink is removed from CPU, install new ones
after thermal diffusion grease is wiped off and silicon
compound is applied to the place shown in the figure.
Thermal diffusion grease : silicon compound (G-765) 90G
Amount to apply
: 0.5 g (as the same size as the tip of
a match) (Pentium 4)
*
Take care not to apply the grease to any other places because
it has high conductivity.
