Pre
par
at
ion
Before Printing
19
Selecting the Input Signal
Before printing, select the appropriate input signal (the
input connector to which the signal to be printed is being
input) VIDEO, S VIDEO, or COMP.
1
Turn on the video monitor and the printer.
2
Press the MENU button and display the INPUT
SETUP menu by pressing the
F
,
f
,
G
or
g
button.
3
Select INPUT SEL by pressing the
F
or
f
button.
4
Select the desired input signal by pressing the
G
or
g
button.
When you select COMP.
When you use the RGB/YCbCr INPUT connectors
to input the image data, select the appropriate type
of the input signal.
1
Select INPUT FORM by pressing the
f
button.
1
2, 5 2, 4, 5
2, 3
Highlight IN in green by pressing the
F
,
f
,
G
or
g
button,
then the INPUT SETUP menu appears.
Highlight INPUT SEL in green by pressing
the
F
or
f
button.
Source signal of the
image to be printed
Video monitor and
printer window display
(the selected input
signal is spelled out)
Signal from video
equipment connected to the
VIDEO IN connector
V
t
VIDEO
Signal from video
equipment connected to the
S VIDEO IN connector
SV
t
S-VIDEO
Signal from video
equipment connected to the
RGB/YCbCr/SYNC
INPUT connectors
C
t
COMP.
Highlight the desired input signal in green
by pressing the
G
or
g
button. The selected
input signal turns green and is spelled out.
Highlight INPUT FORM in green by
pressing the
f
button.
