Sony UP25MD, Инструкция по эксплуатации

Страница: 19 / 76

19
Before Printing
O
p
er
at
io
n
2
Fit the stopper into the two slits on the lid of the paper
feed tray, and insert it all the way in.
Note
Do not pull on the metallic portion of the stopper.
Selecting the Input Signal
Before printing, select the appropriate input signal (the
input connector to which the signal to be printed is being
input) VIDEO, S VIDEO, or COMP.
1
Turn on the video monitor and the printer.
2
Press the MENU button and display the INPUT
SETUP menu by pressing the
M
,
m
,
<
or
,
button.
3
Select INPUT SEL by pressing the
M
or
m
button.
4
Select the desired input signal by pressing the
<
or
,
button.
When you select COMP.
When you use the RGB/YPbPr INPUT connectors to
input the image data, select the appropriate type of the
input signal.
1
2, 5 2, 3, 4, 5
Highlight IN in green by pressing the M , m , < or ,
button, then the INPUT SETUP menu appears.
Source signal of the
image to be printed Video monitor and
printer window display
(the selected input
signal is spelled out)
Signal from video equipment
connected to the VIDEO IN
connector V
t
VIDEO
Signal from video equipment
connected to the S VIDEO
IN connector SV t S-VIDEO
Signal from video equipment
connected to the RGB/
YPbPr/SYNC INPUT
connectors C
t
COMP.
Highlight INPUT SEL in green by pressing
the
M or m button.
Highlight the desired input signal in green by
pressing the
< or , button. The selected input
signal turns green and is spelled out.