Sony UP-971AD, Инструкция по эксплуатации

Страница: 38 / 46

Ot
her
s
Paper
38
The cleaning sheet stops, and the cleaning is
completed.
8
Press the OPEN/CLOSE button to open the paper
door and remove the cleaning sheet.
9
Press the OPEN/CLOSE button to close the paper
door.
Note
Clean the thermal head only when necessary. If you
clean the thermal head too frequently, it may cause a
malfunction.
Cleaning the Platen Roller
If the paper cannot be fed smoothly when printing, the
platen roller may be dirty.
In such a case, clean the platen roller with a soft cloth
soaked in a 76.9 to 81.4 v/v% concentration of ethanol.
1
Press the power on/off switch to turn the unit on.
2
Press the OPEN/CLOSE button to open the paper
door.
3
Clean the platen roller gently with a damp cloth
soaked in ethanol.
Notes
• After the surface of the platen roller wiped has
been dried completely, turn the platen roller to
clean another portion.
• Turn the platen roller by hand.
4
Press the OPEN/CLOSE button to close the paper
door.
Paper
Use only Sony UPP-210SE/UPP-210HD/UPT-210BL
paper designed for use with this unit. High print quality
cannot be guaranteed if any other paper is used with this
unit, and such paper could damage the unit.
Paper You Can Use
Print paper characteristics are as follows.
Note
The UP-971AD model cannot use UPT-210BL.
Notes on storing and handling paper
Do not re-use
Doing so may result in malfunction and
negatively affect printing results.
Storing unused paper
• Store unused paper at a temperature below 30°C
(86°F) in a dry location that is not exposed to direct
sunlight.
• Do not store unused paper near volatile liquids or
allow the paper to contact any organic volatile liquid,
cellophane tape, or any compound of vinyl chloride.
Loading paper
• Handle the paper carefully when loading to avoid
touching the printing surface with your fingers.
Perspiration or oil from you hands could cause
pictures to blur.
• After removing the label from the leading edge of the
paper, pull the paper out 15~20 cm (about 6~8 in.)
before printing. Label adhesive remaining on the
paper could spoil a picture.
Storing printouts
• To prevent printouts from fading or changing color,
store them in a cool, dry location where the
temperature is not higher than 30°C (86°F).
• Store printouts in a polypropylene pouch or between
sheets of paper that contain no plastic.
• Do not store printouts where they will be exposed to
direct sunlight or high humidity.
• Do not store printouts near volatile liquids or allow the
prints to contact cellophane tape, or any compound of
vinyl chloride.
• To prevent fading, do not stack printouts on or under a
diazo copy sheet.
• To mount printouts on another sheet of paper, use
double-sided tape or a water base adhesive.
• Do not incinerate.
Platen roller
Print Characteristics Paper Type
Thermal Print Media(Normal) UPP-210SE
Thermal Print Media(High Density) UPP-210HD
Blue Thermal Transparent Film UPT-210BL