25
UBP-X800 / UBP-UX80
4-687-309-
11
(1)
master page=right
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\060ADD.fm
Settings
an
d
Adjustm
e
nts
x
[HDMI Audio Output]
[Auto]: Outputs audio signal via HDMI OUT 2
jack if it is connected to a device and the
device is turned on. Otherwise, outputs audio
signal via HDMI OUT 1 jack.
[HDMI1]: Outputs audio signal via HDMI OUT 1
jack.
[HDMI2]: Outputs audio signal via HDMI OUT
2 jack.
x
[Quick Start Mode]
[On]: Shortens the startup time when turning
on the player.
[Off]: Reduces standby power consumption.
x
[Auto Display]
[On]: Automatically displays information on
the screen when changing the viewing titles,
picture modes, audio signals, etc.
[Off]: Displays information only when you
press DISPLAY.
x
[Software Update Notification]
[On]: Sets the player to inform you of newer
software version information (page 20).
[Off]
:
Turns off the function.
x
[Gracenote Settings]
[Auto]: Automatically downloads audio CD
(CD-DA) disc information before audio CD
(CD-DA) disc playback after audio CD (CD-DA)
disc recognition. Connect to the network for
downloading.
[Manual]: Downloads the disc information
when [Music Search] is selected.
x
[Device Name]
Displays the player’s name. The player’s
name can be changed.
x
[System Information]
Displays the player’s software version
information and the MAC address.
x
[Software License Information]
Displays information about the Software
License.
[Network Settings]
x
[Internet Settings]
Connect the player to the network
beforehand. For details, see “Step 2: Network
Connection” (page 13).
[Wired Setup]: Select this when you connect
to a broadband router using a LAN cable.
[Wireless Setup]: Select this when you use
the wireless LAN that is built into the player
for wireless network connection.
z
For further details, visit the following website
and check the FAQ contents:
http://www.sony.com/bluraysupport/
x
[Network Connection Status]
Displays the current network status.
x
[Network Connection Diagnostics]
Checks for the proper network connection by
running the network diagnostics.
x
[Screen mirroring RF Setting]
[Auto]: Sets the RF (Radio Frequency) channel
band automatically for Screen mirroring
connection.
[CH 1]/[CH 6]/[CH 11]: Sets CH 1/CH 6/CH 11 as
priority.
x
[Connection Server Settings]
Sets whether or not to display the connected
server.
x
[Auto Home Network Access Permission]
[On]: Allows automatic access from newly
detected Home Network controller-
compatible product.
[Off]: Turns off the function.
x
[Home Network Access Control]
Displays a list of Home Network controller-
compatible products and sets whether or not
to accept commands from the controllers in
the list.
x
[Registered Remote Devices]
Displays a list of your registered remote
devices.
x
[Remote Start]
[On]: Allows you to turn on the player by a
device linked via a network.
[Off]: Turns off the function.
