Sony TRINITRON KV-XF21M83, Руководство по обслуживанию

Страница: 25 / 51

– 25 –
KV-XF21M83/XF21M93
RM-952
2-10.
PICTURE TUBE REMOV
AL
•
REMOV
AL
OF
ANODE-CAP
NOTE
:
After removing the anode, short circuit the anode of the picture tube and the anode cap to the metal chassis, CR
T
shield or carbon paint on the
CR
T
.
•
REMOVING PROCEDURES
1
Do not damage the surface of anode-caps with sharp shaped objects.
2
Do not press the rubber too hard so as not to damage the inside of anode-cap. A
metal fitting called the shatter-hook terminal is built into the rubber
.
3
Do not turn the foot of rubber over too hard. The shatter-hook terminal will stick out or damage the rubber
.
•
HOW T
O
HANDLE
AN
ANODE-CAP
3
When one side of the rubber cap is separated from the anode button, the anode-cap can be removed by turning up the rubber cap and pulling it up in the direction of the arrow
c
.
2
Using a thumb pull up the rubber cap firmly in the direction indicated by the arrow
b
.
1
T
urn up one side of the rubber cap in the direction indicated by the arrow
a
.
a
a
b
b
c
Anode button
2
A board
4
C5 board
7
Neck assy
5
Deflection yoke
Cushion
6
Four screws
(Tapping screws)
1
Anode cap
3
F board