–
20
–
27
Basic Operations
1
Press MENU.
2
Press
M
or
m
to select
, then press ENTER.
3
Make sure TV SET UP is selected, then press ENTER.
4
Press
M
or
m
to select
MANUAL PROGRAM, then
press ENTER.
5
Make sure PR is selected, then press ENTER.
6
Press
M
or
m
to display the program number to which you want
to assign a guide channel number, then press ENTER.
7
Press
M
or
m
to select GUIDE CH, then press ENTER.
8
Press
M
or
m
to select the
guide channel number
listed in a program guide
for your area, then press
ENTER.
9
Press
M
or
m
to select PR, then press ENTER and repeat steps
6
through
8
to set the guide channel number of other channels.
To return to the normal screen
Press MENU.
Note
• Do not change the CH (channel) settings here.
If you want to reassign the channel settings to the program numbers, see
“Presetting channels manually” on page 34.
continued
PLAY
ENTER
H
PLAY
ENTER
H
SELECT
MANUAL PROGRAM
PR : 01
TV SYS : B/G
CH : C08
FINE : AUTO
GUIDE CH : 01
3
ENTER
SELECT
MANUAL PROGRAM
PR : 01
TV SYS : B/G
CH : C08
FINE : AUTO
GUIDE CH : 25
3
ENTER
PLAY
ENTER
H
PLAY
ENTER
H
28
Basic Operations
Recording TV programs (continued)
Recording TV programs using the G-CODE system
Before you begin
• When the TV is in standby mode (the
1
indicator on the video TV
is lit in red), press
?
/
1
, PROGR +/– or a number button on the
remote control.
• Make sure that the clock is set correctly. If it is not, see “Setting the
clock” on page 9.
• Make sure that the loaded cassette has its safety tab intact.
• Make sure that the video TV does not enter the timer recording
standby mode (the QUICK TIMER indicator on the video TV
should not be lit).
1
Press the G-CODE button.
COUNTER RESET
t
MENU
REW
A/B
EJECT
TIMER REC
G-CODE
ON/OFF
TAPE SPEED
INDEX
z
REC
GAME
1
6
7
0
C
9
4
3
2
5
8
X
PAUSE
x
STOP
m
FF
M
Z
.
>
PLAY
ENTER
PIC MODE
-/--
H
?
/
1
ON/OFF
TAPE SPEED
A/B
G-CODE
Number buttons
G-CODE
G–CODE 27 SAT 20:00
Set 0–9
and press to enter
G–CODE NO TAPE SPEED
[– – – – – – – – –] [SP]