Sony TRINITRON KV-21C5B, Руководство по обслуживанию, Страница: 11 / 49

11
18
Using Optional Equipment
Optional Connections
Select and View the Input Signal
1
Connect your equipment to the designated TV socket.
2
Press the button repeatedly on your remote control until the
correct input symbol appears on the TV screen.
Symbol Input signals
1
• Audio/video input signal through the Euro AV
connector
D
• RGB input signal through the Euro AV
connector
D
2 • Audio/video input signal through the phono
sockets
A
and
B
3
Switch on the connected equipment.
4
To return to normal TV picture, press the
button on the remote
control.
Note: To avoid picture distortion, do not connect equipment to the
A
and
D
connectors at the same time.
Additional Information
Connecting a VCR
We recommend you tune in the VCR signal to TV programme number `0'
using the `Manually Tuning in the TV' section of this instruction manual.
Connecting Headphones
Plug in your headphones to the socket
C
on the front of the TV set.
For Mono Equipment
Connect the phono plug to the L/G/S/I socket on the front of the TV
and select
2
input signal using the instructions above. Finally, refer to
the `Adjusting the Sound' section of this manual and select `A' on the
sound menu screen.
You can connect optional audio or video equipment to your TV, such as a VCR, a
camcorder or video games as shown.
Rear of TV
1
2
D
VCR
“PlayStation”
Decoder
Front of TV
L/G/S/I R/D/D/D
A B
C
8mm/Hi8
camcorder
19
Troubleshooting
Additional Information
Here are some simple solutions to problems which may affect the picture and sound.
Problem Solution
No picture (screen is dark), no sound • Plug the TV in.
• Press the button on the front of TV.
• If the indicator is on press
/
button or a
programme number button on the remote control.
• Check the aerial connection.
• Check that the selected video source is on.
• Turn the TV off for 3 or 4 seconds and then turn it
on again using the button on the front of the TV.
Poor or no picture (screen is dark), • Using the MENU system, select the Picture
but good sound Adjustment display.
Adjust the brightness, picture and colour balance
levels.
• From the Picture Adjustment display select to
return to the factory settings.
Poor picture quality when watching • Press the button repeatedly on the remote control
a RGB video source. until the RGB symbol is displayed on the screen.
Good picture, no sound • Press the +/– button on the remote control.
• If is displayed on the screen, press the button
on the remote control.
No colour on colour programmes • Using the MENU system, select the Picture
Adjustment display. Adjust the colour balance.
• From the Picture Adjustment display select to
return to the factory settings.
Distorted picture when changing • Turn off any equipment connected to the 21 pin
programmes or selecting teletext Euro connector on the rear of the TV.
Remote control does not function • Replace the batteries.
Noisy picture when viewing • Adjust fine tuning to obtain better picture reception.
TV channel
The standby indicator on the • Contact your nearest Sony service centre.
TV flashes even though the
“Wake Up Timer”is not in use.
• If you continue to have these problems, have your TV serviced by qualified personnel.
•
NEVER open the casing yourself.
L/G/S/I
R/D/D/D
s 2/
1/
1 2
E F G