84
Displaying the Time Code
Cha
p
te
r 4
O
per
at
ion
s
Displaying the Time Code
The time code superimposed on the SDI signals is
displayed by installing the optional input adaptor (BKM-
250TG).
As the time code is superimposed on the video signal, the
time code may be invisible partially depending on the scan
mode setting of the monitor.
1
Input the SDI signal.
2
Select the picture to be displayed with the screen mode
button (page 42).
3
Set the time code in Time Code (page 68) of the On
Screen Set tab of the System Configuration window.
To set the type of time code
Set in VITC/LTC.
VITC:
Sets to VITC
LTC:
Sets to LTC.
To set the display position for time code
Select in Position.
Top Left:
To display at the top left of the screen
Top Center:
To display at the top center of the screen
Top Right:
To display at the top right of the screen
Bottom Left:
To display at the bottom left of the
screen
Bottom Center:
To display at the bottom center of the
screen
Bottom Right:
To display at the bottom right of the
screen
The display position is fixed when 4K/QFHD mode is
selected.
4
Set Time Code (page 68) to On .
The time code is displayed.
To cancel the time code display
Set Time Code to Off in the On Screen Set tab window
of the System Configuration window.
Note
Note
