7
Features
Chapt
er 1 Ov
e
rv
ie
w
On cleaning the monitor screen
The monitor screen surface is especially treated to reduce
reflection of light.
As incorrect maintenance may impair the performance of
the monitor, take care with respect to the following:
• Wipe the screen gently with a soft cloth such as a
cleaning cloth or glass cleaning cloth.
If you wipe the screen using too much force, the screen
surface may lose uniformity or the LCD panel may
malfunction.
Never use tissue as it may scar the surface of the screen.
• Stubborn stains may be removed with a soft cloth such
as a cleaning cloth or glass cleaning cloth lightly
dampened with water.
• Never use solvent such as alcohol, benzene or thinner, or
acid, alkaline or abrasive detergent, or chemical cleaning
cloth, as they will damage the screen surface.
On cleaning the cabinet
• Clean the cabinet gently with a soft dry cloth. Stubborn
stains may be removed with a cloth lightly dampened
with mild detergent solution, followed by wiping with a
soft dry cloth.
• Use of alcohol, benzene, thinner or insecticide may
damage the finish of the cabinet or remove the
indications on the cabinet. Do not use these chemicals.
• If you rub on the cabinet with a stained cloth, the cabinet
may be scratched.
• If the cabinet is in contact with a rubber or vinyl resin
product for a long period of time, the finish of the cabinet
may deteriorate or the coating may come off.
On Repacking
Do not throw away the carton and packing materials. They
make an ideal container which to transport the unit.
Features
The SRM-L560 LCD Video Monitor incorporates the
panel that supports QFHD (3840 × 2160 pixels) of 4 times
the resolution of full HD.
This is suitable for digital cinema production, industrial
design, CG, simulation, printing, monitoring, ATC (Air
Traffic Control), research and development, video-
equipment development, HD video production or GIS
(Geographic Information System) where precise image
reproduction or four-screen display is required.
The SRM-L560 features flat panel and “TRIMASTER”,
which is a new technology developed for three elements,
“accurate color reproduction,” “precision imaging” and
“quality picture consistency,” that are in demand for
professional use. “TRIMASTER” decreases the viewing
difference that occurs due to the individuality of each
panel. Also, the SRM-L560 realizes the high picture
quality and high-trust required by the color management
system with its wide color gamut device, high-resolution/
precise gradation display and signal processing of high
accuracy/calibration/feedback system.
56-type LCD panel developed for the SRM-L560
The monitor incorporates a 56-type LCD panel developed
for this monitor, which supports QFHD (4 times the
resolution of full HD) and is equipped with a 10-bit driver,
providing high resolution and high color gradation.
Backlight system by LED with high-purity
technology
High-purity LEDs enable wider color space. The precision
backlight system also incorporates a uniformity control
function and color feedback system.
12-bit precision display engine for professional
use
The panel is equipped with a unique signal process engine
developed for the professional use monitor. This engine
incorporates 12-bit output accuracy, providing a high-
quality I/P conversion algorithm, scaling processing, panel
driving and a high-accuracy color management system.
Multi color space
A backlight system with high-precision technology and
color management system which uses the unique 3D LUT
(Look Up Table) reproduces the color space that complies
with the broadcast standard ITU-R BT.709, EBU and
SMPTE-C accurately. A wider color space
1)
allows digital
cinema reproductions.
1)
The RGB chromaticity of SMPTE RP 431-2 is not
covered in full.
