45
Main Operation Window
Chapt
er
3
Men
u
Wind
o
w
3G-SDI:
Sets the serial digital signal format when the
BKM-250TG is installed.
HD-SDI:
Sets the serial digital signal format when the
BKM-243HS, BKM-244CC or BKM-250TG is
installed.
Dual Link HD-SDI:
Sets the Dual-link HD-SDI
signal format when two BKM-243HS or BKM-244CC
are installed in the OPTION 1 and 2 option slots or
BKM-250TG is installed.
[DVI]:
Sets the DVI signal format.
HDMI:
Sets the HDMI signal format.
In this manual, the 800 × 600, 1024 × 768, 1280 × 960,
1280 × 1024 and 1400 × 1050 signals are referred to as
the “HDMI computer signals.”
Combo box 2
When 3G-SDI or Dual Link HD-SDI is selected in
Combo box 1, select the signal format:
4:2:2 YCbCr 10bit
4:4:4 YCbCr 10bit
4:4:4 RGB 10bit
4:4:4 YCbCr 12bit
4:4:4 RGB 12bit
4:4:4 XYZ 12bit
When DVI is selected in Combo box 1, select the
following:
[DVI Video]:
Displays the CEA-861 signal.
DVI Computer:
Displays the computer output signal
such as the VESA standard signal.
b
Input
Sets the input adaptor of the input signal to be displayed
and the input number.
The available setting items differ according to the installed
input adaptor (BKM-243HS, BKM-244CC or BKM-
250TG), screen mode and specified Format. For details,
see page 115.
Option 1 [BKM-xxx] - Input 1
Option 1 [BKM-xxx] - Input 2
Option 2 [BKM-xxx] - Input 1
Option 2 [BKM-xxx] - Input 2
Option 1 [BKM-XXX] - Input 1&2
Option 2 [BKM-XXX] - Input 1&2
Option 1&2 [BKM-xxx] - Input 1
Option 1&2 [BKM-xxx] - Input 2
Option 1 [BKM-xxx]
Option 2 [BKM-xxx]
Option 1&2 [BKM-xxx]
DVI
HDMI
c
Color Temp
Sets the color temperature.
Except for the XYZ format signal
You can select from D93, D65, D61, D56, D-Cine, User
Color Temp 1 to User Color Temp 5.
When D-Cine is selected, the color temperature is set to
x=0.314 and y=0.351 in the CIE chromaticity coordinate.
When D93, D65, D61, D56 or D-Cine data is changed,
they are displayed as D93*, D65*, D61*, D56* or D-
Cine*.
For the XYZ format signal
You can select from D-Cine XYZ or User Color Temp
XYZ 1 to User Color Temp XYZ 5.
When D-Cine XYZ data is changed, it is displayed as D-
Cine XYZ*.
d
Picture Preset
Sets the picture adjustment preset.
Select from [Picture Preset 1] to Picture Preset 5 or Picture
Preset(D-Cine).
e
Matrix/Gamma
Sets Matrix/Gamma data (transmission matrix and
transmission gamma) depending on the input signal
format.
Matrix/Gamma data consist of seven data in which the
transmission matrix and transmission gamma have been
preset and five user data in which the transmission matrix
and transmission gamma can be selected respectively (see
the table below).
Preset data:
ITU-R BT.709, ITU-R BT.601,
SMPTE 240M, D-Cine RGB, D-Cine XYZ,
xvYCC 709, xvYCC 601
Data set respectively:
User Matrix/Gamma 1 to User
Matrix/Gamma 5
The Matrix/Gamma data can be set for each type of the
input signal (HD, DVI/HDMI computer, DC 2048 × 1080
RGB or DC 2048 × 1080 XYZ).
For the type of the input signal, see “Matrix/Gamma
Setting Table” on page 105.
When User LUT that includes Matrix/Gamma data is
applied, the Matrix/Gamma data are changed to those of
the specified user data, regardless of this window setting.
For details of User LUT, see the Display Function window
(page 59).
Note
Matrix/Gamma
Matrix
(Transmission
matrix)
Gamma
(Transmission
gamma)
ITU-R BT.709
ITU709
2.2
ITU-R BT.601
ITU601
2.2
SMPTE 240M
SMPTE240M
2.2
D-Cine RGB
ITU709
2.6 RGB
D-Cine XYZ
ITU709
2.6 XYZ
xvYCC 709
ITU709
xvYCC
xvYCC 601
ITU601
xvYCC
