Sony SX-M100, Руководство по обслуживанию

Страница: 32 / 155

2-2(E)
SX-M700
SX-E120
PS-364
CPU-181
SONY
Screw “a” (5 pcs)
B 3
x 6
TYPE 2
Connector
CN903
Screw “c”
PSW 4
x 8
GND Lug
Screw “b” (2 pcs)
BVTP 3
x 8
TYPE 2
Connector
(from PS-364
board)
Harness
Power lamp
1. Release the power lamp harness from its
harness clamp. Disconnect the connector from
the power lamp.
2. Remove the two fixing screws “b” (BVTP 3
x
8)
from the left and right side panels, then remove
the front panel assembly in the direction of arrow
B .
2
Removal of the Rear Panel Assembly
Harness clamp
EXP
ANSION UNIT
SX-E120
Front panel assembly
Screw “b” (2 pcs)
BVTP 3
x 8
TYPE 2
Harness tie band
AL-31 board
Connector
CN908
(from AC Inlet)
C
1. Remove the top panel.
2. Release the power lamp harness from its harness clamp.
Disconnect the connector from the power lamp.
3. Cut the harness tie band.
4. Remove the fixing screw “c” (PSW 4
x
8) securing the GND
lug of the harness coming from the connector (CN903).
5. Disconnect the connector (CN903) from the PS-364 board.
6. Disconnect the connector (CN908) from the AL-31 board.
7. Remove the fixing screw “d” (PSW 4
x
8) securing the GND
lug of the PS-363 board.
8. Remove the three screws “e” (B 2.6
x
6) near the connectors.
9. Remove the four fixing screws “f” (BVTP 3 x 8), then remove
the rear panel assembly in the direction of arrow C .
3
Removal of the Front Panel Assembly
B
Screw “f” (2 pcs)
BVTP 3
x
8
TYPE 2
Screw “e” (3 pcs)
B 2.6
x 6
Screw “f” (2 pcs)
BVTP 3
x 8
TYPE 2
Screw “a” (5 pcs)
B 3
x
6
TYPE2
1. Remove the ten fixing screws “a” (B 3
x
6).
2. Remove the top panel the direction of arrow A .
1
Removal of the Top Panel
A
PS-364 board
GND Lug
PS-363 board
Screw “d”
PSW 4
x 8