39
Settings and
Adjustments
Settings and Adjustments
Operation Settings
(Settings)
The “Settings” setup helps you to make clock and
other settings for the recorder.
1
Press SYSTEM MENU while the recorder is
in stop mode.
2
Select “SETUP,” and press ENTER.
3
Select “Settings,” and press ENTER.
The “Settings” setup appears with the
following options. The default settings are
underlined.
b
Note
In step 1, you can also use the SYSTEM MENU button
on the recorder (page 53).
Time Zone
Selects the time zone of your area for clock
setting.
The options are:
NSW/ACT
y
VIC
y
QLD
y
SA
y
WA
y
TAS
y
NT
i Plate timeout
Sets the display duration for a programme
information box (i Plate).
The time options are: 5, 10, 15, 20, 30, 60 Sec.
(seconds)
See page 20 for details.
FP (front panel) Display
Adjusts the lighting of the front panel display.
b
Note
When “Power Save” (below) is set to “On,” the front
panel display is turned off during standby regardless of
this setting.
Power Save
Selects whether this recorder is in power save
mode when the power is turned off (standby).
Command Mode
Changes the Command Mode of the recorder if
another HDD recorder is assigned the same
Command Mode. Be sure to match the Command
Mode of the supplied remote to the setting made
here. For details, see “If you have more than one
Sony HDD recorder” on page 16.
SETUP
Time Zone
i Plate timeout
FP Display
Power Save
Command Mode
NSW/ACT
60 Sec.
Normal
Off
HDD 1
Settings
DTV Settings
Video
Audio
Password
Others
Easy Setup
Normal
Brightens the lighting.
Dimmer
Dims the lighting.
Off
Turns off the lighting.
On
Sets to power save mode. The
front panel display is off when the
recorder is in standby.
Off
Does not set to power save mode.
Normally, select this.
HDD1
The default Command Mode of
this recorder.
HDD2
Select this if the default Command
Mode conflicts with other HDD
recorder.
HDD3
Select this if the default Command
Mode conflicts with other HDD
recorder.
