21
(US)
6
Press MENU twice.
The VCR returns to the original screen. When
there are any other timer settings left in the TIMER
SET menu, press TIMER to return to recording
standby.
To check the timer settings during timer
recording
Press MENU and select 2. TIMER SET. After
checking, press MENU twice to turn off the display.
When the timer settings overlap
The VCR will not record overlapping programs. If any
of your timer settings overlap, change the settings.
Case 1: If you preset two programs to start
recording at the same time...
The program listed first in the TIMER SET menu has
priority over the other programs. The timer settings of
lower priority programs will start recording when the
VCR stops recording the higher priority program.
Case 2: If you preset program 1 to start recording
before program 2 is finished recording...
Program 1 will start recording after program 2 has
finished.
Note
The VCR starts recording 15 seconds before the preset
start time.
About memory back-up function
The VCR has a memory back-up function. Even if the
power is interrupted, settings and adjustments are
retained for up to 30 days using the built-in
rechargeable battery.
Case 2
Program 1
Program 2
11:00
10:30
11:30
10:00
Checking/changing/cancelling
timer settings
This section shows you how to check, change and
cancel the timer settings after you have stored them in
the VCR.
Before you start...
Turn on your monitor.
1
Press TIMER to turn off the TIMER indicator in
the display window.
2
Press POWER to turn on the VCR.
3
Press MENU and select 2. TIMER SET using
SHIFT
v
, then press SHIFT
b
.
The TIMER SET menu appears.
[ TIMER SET ]
1 0 1 3:1 5 1 4:0 0
SP
MON 0 2:0 0 0 3:0 0
SP
0 4 1 1:0 0 1 1:5 0
SP
MO-SA 0 9:0 0 1 0:3 0
EP
– – – –:– – – –:– –
– –
– – – –:– – – –:– –
– –
– – – –:– – – –:– –
– –
– – – –:– – – –:– –
– –
DATE START STOP MODE
4
Check the timer settings:
If you do not need to change or cancel the settings,
press MENU twice, then press TIMER to return to
recording standby.
5
Change or cancel the timer setting:
• To change the setting,
press SHIFT
v
and
SHIFT
b
to flash the
item you want to
change, and reset it
using DATA +/–.
• To cancel the setting,
press SHIFT
v
and
SHIFT
b
to flash the
“MODE” setting of
the program you want
to cancel, then set it to
“– –” using DATA +/
–. By pressing SHIFT
v
, the program is
cancelled.
[ TIMER SET ]
1 0 1 3:1 5 1 4:0 0
SP
MON 0 2:0 0 0 4:0 0
SP
0 4 1 1:0 0 1 1:5 0
SP
MO-SA 0 9:0 0 1 0:3 0
EP
– – – –:– – – –:– –
– –
– – – –:– – – –:– –
– –
– – – –:– – – –:– –
– –
– – – –:– – – –:– –
– –
DATE START STOP MODE
[ TIMER SET ]
1 0 1 3:1 5 1 4:0 0
SP
MON 0 2:0 0 0 3:0 0
SP
– – – –:– – – –:– –
– –
MO-SA 0 9:0 0 1 0:3 0
EP
– – – –:– – – –:– –
– –
– – – –:– – – –:– –
– –
– – – –:– – – –:– –
– –
– – – –:– – – –:– –
– –
DATE START STOP MODE
10:00
10:50
11:30
Case 1
Program 1
(listed first)
Program 2
(listed next)
Will be
cut off
Will be
cut off
