Sony super motion hdc4300, Руководство по обслуживанию

Страница: 141 / 206

Section 7
File System
This unit is equipped with the file systems for managing data.
In this section, the menu operations are described as follows.
Example: When executing WRITE (CAM → USB) on the OPERATOR FILE page of the OPERATION menu
[OPERATION] → [OPERATOR FILE] → [WRITE (CAM → USB)]
As for the details on the setup menu, refer to
“8. Setup Menu” .
7-1. File Structure
The following six types of files are available. As for the items to be stored in each file, refer to “7-8. File Items” .
1. Operator File (Refer to “7-2. Operator File” .)
Stores the items displayed on the viewfinder and switch settings for camera operator. This file can be stored in a
USB drive, yet video data (paint data) cannot be stored.
2. Preset Operator File (Refer to “7-3. Preset Operator File” .)
Stores the factory settings of Operator File.
This file can be stored in the camera, yet video data (paint data) cannot be stored.
3. Scene File (Refer to “7-4. Scene File” .)
Stores the temporary video setting data according to the scene. This file can be stored in the camera and a USB
drive.
4. Reference File (Refer to “7-5. Reference File” .)
Stores the custom paint data adjusted by the video engineer. This file can be stored in the camera and a USB drive.
5. Lens File (Refer to “7-6. Lens File” .)
Used for compensation of the deviation which is generated by switching the lens extender from OFF to ON and
for compensation of the difference in the characteristics between lenses. This file is stored in the camera.
6. OHB File (Refer to “7-7. OHB File” .)
Used for adjustment of the CMOS block maintenance. This file can be stored in the camera.
HDC4300
7-1