background image

39

US

Ge
tting Star

te

d

8: Selecting the speaker 
system

You can select the front speakers you want to 
drive. 
Be sure to use the buttons on the receiver for 
this operation.

Press SPEAKERS (OFF/A/B/A+B) 
repeatedly to select the front 
speaker system you want to drive.

To turn off the speaker output

Press SPEAKERS (OFF/A/B/A+B) 
repeatedly until the “SP A”, “SP B” and

 

“SP A + B” indicators on the display do not 
light up. “ALL OFF” appears on the display 
for a while.
No audio signals are output from any speaker 
terminals.

Note

You cannot switch the front speaker system by 
pressing SPEAKERS (OFF/A/B/A+B) when the 
headphones are connected.

9: Calibrating the 
appropriate speaker 
settings automatically

 

(Auto Calibration)

This receiver is equipped with DCAC (Digital 
Cinema Auto Calibration) function which 
allows you to perform automatic calibration as 
follows:
• Check the connection between each speaker 

and the receiver.

a)

• Adjust the speaker level.
• Measure the distance of each speaker to your 

listening position.

a)

• Measure the speaker polarity.
• Measure the speaker size.

a)

• Measure the frequency characteristics.

a)b)

a)

The measurement result is not utilized in the 
following case.
– “Analog Direct” is being used.
–  The multi channel input is selected.

b)

The measurement result is not utilized in the 
following case.
– Dolby TrueHD signals with a sampling 

frequency of more than 96 kHz are being 
received.  

– PCM signals with a sampling frequency of more 

than 96 kHz are being received.

The DCAC is designed to obtain proper sound 
balance in your room. However, you can 
adjust the speaker levels and balance manually 
according to your preference. For details, see 

 

“Making settings with the Test Tone menu” 
(page 59).

To select

Light up

The speakers connected to the 
SPEAKERS FRONT A terminals

SP A

The speakers connected to the 
SPEAKERS FRONT B terminals

SP B

The speakers connected to both the 
SPEAKERS FRONT A and B 
terminals (parallel connection)

SP A + B

SPEAKERS

(OFF/A/B/A+B)

PHONES

VIDEO 2 IN/PORTABLE AV IN

VIDEO

L  AUDIO  R

AUTO CAL MIC

MEMORY/

ENTER

2CH/

A.DIRECT

A.F.D.

MOVIE

MUSIC

DIMMER

MULTI CHANNEL DECODING

INPUT SELECTOR

TONE MODE

ON/STANDBY

TUNING MODE

POWER

TUNING

DISPLAY

INPUT MODE

MASTER VOLUME

TONE

SPEAKERS (OFF/A/B/A+B)

Содержание STRDG920 - STR AV Receiver





















































































































Отзывы: