To update the software at the midnight while the receiver is not used, set [Auto Update] to [On] and
also set [Network Standby] (*) to [On].
If [Auto Update] is set to [On] while [Network Standby] (*) is set to [Off], update starts automatically
while the receiver is turned off.
Depending on the provided update type, the update may start automatically even if [Auto Update] is
set to [Off], or the update may start automatically while the receiver is turned off.
[224] Adjusting Settings
System Settings
Updating the software (Software Update)
Note
It may take about 1 hour for the update to be completed.
Do not turn the receiver off while the software is being updated. It may cause a malfunction.
You cannot restore the old version after updating the software.
[225] Adjusting Settings
Using the menu on the display panel
Operating the receiver with the menu on the display
panel
You can operate this receiver using the display panel even if the TV is not connected to the
receiver.
For USA, Canadian and Asia-Pacific models only
*
Select [Setup] - [System Settings] from the home menu.
1
Select [Software Update].
2
Select [Update via Internet] or [Update via USB Memory].
If you select [Update via USB Memory], please visit the customer support website to
download the latest software version.
3
Update the software.
[UPDATING] flashes on the display panel during the software update process. However,
[UPDATING] may disappear temporary during updating.
When the update is completed, [COMPLETE] appears on the display panel and the
receiver restarts automatically.
4
