If a speaker pattern with surround back speakers is selected, you cannot set [Height/Overhead
Speakers].
If you select a speaker pattern with the speakers connected to the SPEAKERS SURROUND
BACK/HEIGHT terminals and select [Save], [Zone2 Power] will be set to [Off] automatically (for USA
and Canadian models only).
[165] Adjusting Settings
Speaker Settings
Checking the speaker position and the corresponding
speaker terminals (Speaker Connection Guide)
This function lets you know the position of the speaker you select and the corresponding
speaker terminals on the receiver to which the speaker should be connected.
Note
When connecting speaker cables, etc., be sure to disconnect the AC power cord (mains lead).
[166] Adjusting Settings
Speaker Settings
Setting the priority on the surround back speakers or
Zone 2 speakers (SURROUND BACK/ZONE2 Priority)
(for USA and Canadian models only)
When speakers are connected to both the SPEAKERS SURROUND BACK/HEIGHT terminals
and SPEAKERS ZONE 2 terminals, you can set which speakers are given priority.
Select [Setup] - [Speaker Settings] from the home menu.
1
Select [Speaker Connection Guide].
A message appears.
2
Select [Continue].
3
Select the speaker you want from the list.
The position of the speaker and the corresponding terminals on the receiver to which the
speaker should be connected are shown on the screen.
4
Select [Setup] - [Speaker Settings] from the home menu.
1
