Note
You can only set [Surround Back Speaker Assign] under the following conditions:
The speaker pattern is set to a setting without surround back and height/overhead speakers.
Headphones are not connected.
[Bluetooth Mode] is set to other than [Transmitter].
[164] Adjusting Settings
Speaker Settings
Selecting the speaker pattern (Speaker Pattern)
You can select the speaker pattern you want according to your speaker installation.
Note
This function does not work in the following cases:
Headphones are connected.
[Bluetooth Mode] is set to [Transmitter].
Select the desired speaker pattern according to the speaker installation example
displayed on the TV screen, then select [Save].
3
Select the setting you want (*).
Off:
When none of the following connections is used.
Front B:
When using the front B speaker connection.
BI-AMP:
When using the bi-amplifier speaker connection.
Zone2 (for European and Asia-Pacific models only):
When using the Zone 2
connection.
4
The displayed settings vary depending on the speaker pattern you selected.
*
Select [Setup] - [Speaker Settings] from the home menu.
1
Select [Speaker Pattern].
2
Select the speaker pattern appropriate to your speaker configuration under
[Listener-level Speakers] by referring to the speaker installation example displayed
on the TV screen.
3
Select the speaker pattern appropriate to your speaker configuration under
[Height/Overhead Speakers] by referring to the speaker installation example
displayed on the TV screen.
4
Select [Save].
5
