Note
Characters or marks in some languages may not be displayed.
[148] Adjusting Settings
Easy Setup
Setting up the receiver using Easy Setup
When you turn on the receiver for the first time or after the receiver is initialized, the Easy Setup
screen appears on the TV screen. You can set up the following settings for the receiver by
following the instructions on the Easy Setup screen.
Select your language (for USA, Canadian, European and Australian models only)
Select the language of messages on the screen.
Speaker Settings
Check your speaker system and perform automatic calibration according to the configuration
and arrangement of your speaker system.
Internet Settings
Select the network connection method and configure settings to connect the receiver to the
network.
Note
Switch the input of the TV to the input to which the receiver is connected to use this function.
Auto Calibration is not available when [Bluetooth Mode] is set to [Transmitter].
If the Easy Setup screen does not appear or you want to display the Easy Setup screen
manually, you can display it by selecting [Setup] - [Easy Setup] from the home menu.
[149] Adjusting Settings
Performing Auto Calibration
1. About Auto Calibration
When listening to FM radio
Preset station name (*1) - Frequency - Sound field currently applied (*2) - Volume level
When receiving RDS broadcasts (for European and Asia-Pacific models
only)
Program service name or preset station name (*1) - Frequency, band and preset number -
Sound field currently applied (*2) - Volume level
Index name appears only when you have assigned one to the input or preset station. Index name does not appear
if only blank spaces have been entered or it is same as the input name.
*1
[PURE.DIRECT] appears on the display panel when the Pure Direct function is activated.
*2
Stream information may not be displayed.
*3
