want using [Speaker Pattern] in the [Speaker Settings] menu.
You can only set [Surround Back Speaker Assign] if the speaker pattern is set to a setting that does
not have surround back and height/overhead speakers.
Only audio signals from [USB], [Bluetooth] (while in BLUETOOTH RX mode only), [Home Network],
[Music Service List], [FM TUNER] and audio signals input from AUDIO IN jacks are output to the
Zone 2 speakers.
External digital input from OPTICAL IN, COAXIAL IN and HDMI IN jacks cannot be output to Zone 2.
[118] Using the Multi-Zone Features
Enjoying sound from speakers located in another room
(Zone 2)
Setting the priority on the surround back speakers or
Zone 2 speakers (SURROUND BACK/ZONE2 Priority)
(for USA and Canadian models only)
When speakers are connected to both the SPEAKERS SURROUND BACK/HEIGHT terminals
and SPEAKERS ZONE 2 terminals, you can set which speakers are given priority.
Note
When [Zone2 Power] is set to [Off], the SPEAKERS SURROUND BACK/HEIGHT terminals are
enabled even if [ZONE2 Terminals] is selected.
When [ZONE2 Terminals] is selected and [Zone2 Power] is set to [On], [Zone2 Power] will be set to
[Off] automatically if the [Speaker Pattern] is set to [5.0] or higher.
[119] Using the Multi-Zone Features
Enjoying sound from speakers located in another room
(Zone 2)
Configuring speakers installed in Zone 2 (for European
and Asia-Pacific models only)
Before enjoying sound using speakers installed in Zone 2, configure the speakers by following
the procedure below.
Select [Setup] - [Speaker Settings] from the home menu.
1
Select [SURROUND BACK/ZONE2 Priority].
2
Select the setting you want.
ZONE2 Terminals:
Priority is placed on the SPEAKERS ZONE 2 terminals.
SURROUND BACK Terminals:
Priority is placed on the SPEAKERS SURROUND
BACK/HEIGHT terminals and the SPEAKERS ZONE 2 terminals are disabled.
3
