Sony STR DH700 - A/V Receiver, Руководство по эксплуатации

Страница: 37 / 108

37 US
P
lay
b
a
ck
You can enter a name of up to 8 characters for
inputs and display it on the receiver’s display.
This is convenient for labeling the jacks with
the names of the connected components.
1
Press the input button to select
the input you want to create an
index name for.
You can also use INPUT SELECTOR on
the receiver.
2
Press AMP MENU.
“1-LEVEL” appears on the display.
3
Press V / v repeatedly to select
“7-SYSTEM”.
4
Press or b to enter the
menu.
5
Press V / v to select “NAME IN”.
6
Press or b to enter the
parameter.
The cursor flashes and you can select a
character.
7
Press V / v to select a character,
then press B / b to move the
cursor to the next position.
If you made a mistake
Press B / b until the character you want to
change flashes, then press
V
/
v
to select
the correct character.
Tips
• You can select the character type as follows
by pressing V / v .
Alphabet (upper case) t Numbers t
Symbols
• To enter a blank space, press b without
selecting a character.
8
Press .
The name you entered is registered.
Naming input