2
STR-DE495/DE595
1) Depending on the sound field settings and the
source, there may be no sound output.
2) Measured under the following conditions:
Area code
Power requirements
E2, AUS
240 V AC, 50 Hz
SP, MY, AEP, UK, AR,
230 V AC, 50 Hz
KR
TW
110 V AC, 60 Hz
Frequency response
MULTI CH IN
10 Hz – 50 kHz
(STR-DE595 only), CD
+0.5/–2 dB (with sound
(STR-DE495 only),
field and tone bypassed)
MD/TAPE, DVD,
VIDEO 1, 2
CD/SACD (STR-DE595
10 Hz – 70 kHz
only)
+0.5/–2 dB (with sound
field and tone bypassed)
Inputs (Analog)
MULTI CH IN
Sensitivity: 500 mV
(STR-DE595 only), CD/
Impedance: 50 kilohms
SACD (STR-DE595
S/N
3)
: 96 dB
only), CD (STR-DE495
(A, 500 mV
4)
)
only), MD/TAPE, DVD,
VIDEO 1, 2
3) INPUT SHORT (with sound field and tone
bypassed).
4) Weighted network, input level.
Inputs (Digital)
DVD (Coaxial)
Sensitivity: –
Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
CD/SACD (Optical)
Sensitivity: –
(STR-DE595 only),
Impedance: –
VIDEO 2 (Optical)
S/N: 100 dB
(A, 20 kHz LPF)
Outputs
MD/TAPE (OUT),
Voltage: 500 mV
VIDEO1
Impedance: 10 kilohms
(AUDIO OUT)
SUB WOOFER
Voltage: 2 V
Impedance: 1 kilohms
Tone
Gain levels:
±6 dB, 1 dB step
FM tuner section
Tuning range
87.5 - 108.0 MHz
Antenna terminals
75 ohms, unbalanced
Intermediate Frequency
10.7 MHz
Sensitivity
Mono:
18.3 dBf, 2.2 µV/75 ohms
Stereo:
38.3 dBf, 22.5 µV/75 ohms
Usable sensitivity
11.2 dBf, 1 µV/75 ohms
S/N
Mono:
76 dB
Stereo:
70 dB
Harmonic distortion at 1 kHz
Mono:
0.3%
Stereo:
0.5%
Separation
45 dB at 1 kHz
Frequency response
30 Hz – 15 kHz,
+0.5/–2 dB
Selectivity
60 dB at 400 kHz
AM tuner section
Tuning range
Models of area code US, CND
With 10-kHz tuning scale: 530 – 1710 kHz
5)
With 9-kHz tuning scale: 531 – 1710 kHz
5)
Models of area code E2
With 10-kHz tuning scale: 530 – 1610 kHz
5)
With 9-kHz tuning scale: 531 – 1602 kHz
5)
Models of area code AUS, SP, AEP, UK, TW, KR
With 9-kHz tuning scale: 531 – 1602 kHz
Models of area code MX, AR
With 10-kHz tuning scale: 530 – 1610 kHz
Antenna
Loop antenna
Intermediate Frequency
450 kHz
Usable sensitivity
50 dB/m (at 1,000 kHz or
999 kHz)
S/N
54 dB (at 50 mV/m)
Harmonic distortion
0.5 % (50 mV/m, 400 Hz)
Selectivity
At 9 kHz:
35 dB
At 10 kHz:
40 dB
5) You can change the AM tuning scale to 9 kHz or
10 kHz. After tuning in any AM station, turn off
the receiver. Hold down PRESET and
press
?/1
. All preset stations will be erased when
you change the tuning scale. To reset the scale to
10 kHz (or 9 kHz), repeat the procedure.
Video section
Inputs
Video:
1 Vp-p, 75 ohms
Component Video (STR-DE595 only, except for
models of area code AEP, UK):
Y:
1 Vp-p, 75 ohms
P
B
/B-Y:
0.7 Vp-p, 75 ohms
P
R
/R-Y:
0.7 Vp-p, 75 ohms
Outputs
Video:
1 Vp-p, 75 ohms
Component Video (STR-DE595 only, except for
models of area code AEP, UK):
Y:
1 Vp-p, 75 ohms
P
B
/B-Y:
0.7 Vp-p, 75 ohms
P
R
/R-Y:
0.7 Vp-p, 75 ohms
General
Power requirements
Area code
Power requirements
US, CND, MX
120 V AC, 60 Hz
AEP, UK
230 V AC, 50/60 Hz
SP , MY, KR, AR
220 – 230 V AC, 50/60 Hz
E2
120/220/240 V AC, 50/60 Hz
TW
110 V AC, 50/60 Hz
AUS
240 V AC, 50Hz
Power consumption
Area code
Power consumption
US, MX
STR-DE595: 210 W
CND
STR-DE595: 310 VA
AEP, UK, TW, KR
STR-DE595: 210 W
STR-DE495: 180 W
SP, MY
STR-DE595: 180 W
AUS, E2, AR
STR-DE595: 210 W
Power consumption (during standby mode)
0.3 W
Dimensions
430
×
145
×
298 mm
(16
7/8
×
5
6/8
×
11
6/8
in.)
including projecting parts
and controls
Mass (Approx.)
STR-DE595: 7.5 kg (16 lb 9 oz)
STR-DE495: 7.2 kg (15 lb 14 oz)
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Remote commander RM-U306A (1)
R6 (size-AA) batteries (2)
Design and specifications are subject to change
without notice.
• Abbreviation
CND
: Canadian model
AUS
: Australian model
MX
: Mexican model
SP
: Singapore model
E2
: AC 120 V area in E model
AR
: Argentine model
KR
: Korean model
TW
: Taiwan model
Ver 1.1
