Sony STR-DA9000ES - Fm Stereo/fm-am Receiver, Руководство по эксплуатации

Страница: 50 / 68

masterpage:Left
filename[\\Nas-data-server\SONY Current jobs\SONY STR-
DA9000ES\DTP\4249349131\424934913STR-DA9000ESUC2\GB070TH_STR-DA9000ES-
U.fm]
50 US
model name1[STR-DA9000ES]
[4-249-349-13(1)]
You can set the receiver to turn off automatically
at a specified time. Use the remote for this
operation.
Press SLEEP repeatedly while the power is
on.
Each time you press SLEEP, the display changes
cyclically as follows:
2:00:00
t
1:30:00
t
1:00:00
t
0:30:00
t
OFF
While using Sleep Timer, “SLEEP” lights up in
the display.
Tip
To check the remaining time before the receiver turns
off, press SLEEP while the power is on. The remaining
time appears in the display.
This receiver allows you to switch between 3
different surround speaker configurations (A, B,
and A+B). There are two sets of surround
speaker terminals (A and B). The SPEAKERS
SURROUND A terminals are for standard
operation with up to 7.1 channels. Use the
SPEAKERS SURROUND B terminals to
connect additional surround speakers for use in
either a separate 5.1 channel system
(independent from the 7.1 channel system), or as
additional speakers to make the 7.1 channel
system into a 9.1 channel system.
Using only the speakers connected to
the SPEAKERS SURROUND A terminals
This is a standard speaker system for use with
movies and Super Audio CDs.
Using the speakers connected to the
SPEAKERS SURROUND B terminals
You can create two separate surround systems, a
7.1 channel system for movies and a 5.1 channel
system for Super Audio CDs. In this case,
connect the surround speakers for movies to the
SPEAKERS SURROUND A terminals and
connect the surround speakers for music to the
SPEAKERS SURROUND B terminals. This is
useful if you mainly listen to Super Audio CDs,
but also want to enjoy a theater-like sound stage
for movies.
Selecting the front speaker
system
Set the SPEAKERS FRONT switch according
to the front speakers you want to drive.
Using the Sleep Timer Selecting the speaker
system
Set to To select
A The speakers connected to the
SPEAKERS FRONT A terminals.
B The speakers connected to the
SPEAKERS FRONT B terminals.
A+B* The speakers connected to both the
SPEAKERS FRONT A and SPEAKERS
FRONT B terminals (parallel
connection).