Sony STR-DA5400ES, Руководство по эксплуатации

Страница: 59 / 322

59 GB
P
lay
b
a
ck
5
Turn on the component and
start playback.
6
Press MASTER VOL +/– to
adjust the volume.
Tips
• You can adjust the volume differently depending
on the speed with which you turn the MASTER
VOLUME knob.
To turn the volume up or down quickly: turn the
knob quickly.
To make fine adjustment: turn the knob slowly.
• You can adjust the volume differently depending
on the length of time you press and hold the
MASTER VOL +/– button on the remote.
To turn the volume up or down quickly: press and
hold the button.
To make a fine adjustment: press the button and
release it immediately.
To activate the muting function
Press MUTING on the remote. To cancel,
press MUTING on the remote again or press
MASTER VOL + to raise the volume.
To avoid damaging your
speakers
Before you turn off the receiver, be sure to turn
down the volume level.
You can enter a name of up to 8 characters for
inputs and display it.
This is convenient for labeling the jacks with
the names of the connected components.
1
Press V / v repeatedly on the
“ Input” screen to select the
input you want to name.
2
Press OPTIONS.
The option menu appears.
3
Press V / v repeatedly to select
“Name Input,” then press .
The soft keyboard appears on the screen.
4
Press V / v / B / b to select a
character one by one, then
press .
5
Press V / v / B / b to select
“Finish,” then press .
The name you entered is registered.
To cancel naming input
Press V / v / B / b to select “Cancel,” then
press .
When you select “ Input,” you can change
the items to be displayed.
1
Press V / v repeatedly on the
“ Input” screen to select the
input you want.
2
Press OPTIONS.
The option menu appears.
3
Press V / v repeatedly to select
“List Mode,” then press .
4
Press V / v repeatedly to select
the item you want to display,
then press
.
• Input Assign
Input name and audio/video input jack
assigned to the input are displayed in a
list.
• Sound Field
Input name and the sound field selected
for the input are displayed in a list.
• A/V Sync
Input name and the delay set on the “A/
V Sync” menu for the input are
displayed in a list.
Naming the input (Name Input)
Changing the display items (List
Mode)