Sony STR-DA3600ES - Multi Channel Av Receiver, Руководство по эксплуатации

Страница: 136 / 162

136 GB
2
Select “Quick Click,” then press
.
3
Select “Macro,” then press .
4
Select the macro number for
which you want to program the
sequence of operation(s), then
press .
5
Select the step number you
want to set, then press
.
6
Select the component type you
want, or “- Wait -,” then press
b .
If you select “- Wait -,” go to step 8.
7
Select the key, then press b .
8
Select the duration of time you
want, then press
.
9
Repeat steps 6 to 8 when you
want to program operations for
other components.
To input a macro name
1
Select “ Settings” from the menu,
then press or b .
2
Select “Quick Click,” then press .
3
Select “Macro,” then press .
4
Press OPTIONS.
The option menu appears.
5
Select “Name Input,” then press .
6
Press V / v to select a character, then
press b .
You can shift input position backward and
forward by pressing
B / b .
7
Repeat steps 6 to input a character one
by one.
The name you entered is registered.
To erase a programmed macro
1
Select “ Settings” from the menu,
then press or b .
2
Select “Quick Click,” then press .
3
Select “Macro,” then press .
4
Select the macro number you want,
then press
.
5
Select the step number you want, then
press .
6
Select “–” as a component name, then
press .
7
Repeat steps 5 and 6 to clear the
stored macro.
Setting remote control
codes that are not stored
in Quick Click
1
Select “ Settings” from the
menu, then press or b .
2
Select “Quick Click,” then press
.
3
Select “Source Component,” or
“Common Component,” then
press .
4
Select the component you
want, then press
.
V / v / B / b ,
MENU