masterpage:Left
lename[E:\SEM_Janet\Revision_DA3100ES\J9050000_2514877121STRDA3100ESU\251487
121\GB06ADV_STR-DA3100ES-U.fm]
model name1[STR-DA3100ES]
[2-514-877-
12
(1)]
42
US
x
SB DEC MODE [XXXXXXX] (SB DEC MODE)
You can use the CUSTOMIZE menu to set the SB
DEC mode, see page 41.
• DDEX
• PLIIx MV
• PLIIx MS
Note
This parameter is valid only in A.F.D. mode (page 30).
x
9.1 CH SP SYSTEM [XXX]
(9.1 ch speaker system)
• YES
When two pairs of speakers are connected to
SURROUND SPEAKERS in parallel and a pair of
speakers are connected to SURR BACK
SPEAKERS terminal.
• NO
When only a pair of speakers are connected to either
SURROUND SPEAKERS terminals.
Notes
• This function is valid when surround back speakers
is set to DUAL only.
• When the IMPEDANCE SELECTOR is set to “8
Ω
”,
connect the speakers with a nominal impedance of 16
ohm or higher. When the IMPEDANCE
SELECTOR is set to “4
Ω
”, connect the speakers
with a nominal impedance of 8 ohms or higher. For
details, see “Speaker impedance” page 17.
x
A/V SYNC [XXX ms]
(Time alignment)
Initial setting: 0 ms
Lets you delay the output of audio to adjust the gap
between video and audio. You can adjust from 0 ms to
200 ms in 10 ms steps.
x
S.FIELD LINK [XXX] (Sound field link)
• ON
Lets you apply the last selected sound field to an
input whenever it is selected. For example, if you
select STADIUM for the SA-CD/CD input, then
change to a different input and return to SA-CD/CD,
STADIUM will automatically be applied again.
• OFF
Sound field link is not activated.
x
DEC. PRIORITY [XXXX]
(Digital audio input decoding priority)
Lets you specify the input mode for the digital signal
input to the DIGITAL IN jacks.
The initial setting is “AUTO” for VIDEO 1, VIDEO 2,
VIDEO 3, TV/SAT, TAPE, TUNER and PHONO,
and “PCM” for DVD, MD/DAT and SA-CD/CD. You
can use DECODE PRIORITY on the front panel.
• AUTO
Automatically switches the input mode between
DTS, Dolby Digital, or PCM.
• PCM
PCM signals are given priority (to prevent the
interruption when playback starts). Even when other
signals are input, the sound is output. When set to
“AUTO” and the sound from the digital audio jacks
(for CD, etc.) is interrupted when playback starts, set
to “PCM”.
x
DUAL MONO [XXXXXXXX]
(Digital broadcast language selection)
Lets you select the language you want to listen to
during digital broadcast. This feature only functions
for Dolby Digital sources.
• MAIN/SUB
Sound of the main language will be output through
the front left speaker and sound of the sub language
will be output through the front right speaker
simultaneously.
• MAIN
Sound of the main language will be output.
• SUB
Sound of the sub language will be output.
• MAIN+SUB
Mixed sound of both the main and sub languages will
be output.
x
OSD H.POSITION[XX]
(OSD horizontal position)
Initial setting: 4
Lets you adjust the position of the on-screen display
horizontally. You can adjust from 0 to 64.
x
OSD V.POSITION [XX]
(OSD vertical position)
Initial setting: 4
Lets you adjust the position of the on-screen display
vertically. You can adjust from 0 to 32.
x
DIMMER [XX % DOWN]
(Brightness of the display)
Lets you adjust the brightness of the display. The
DIMMER indicator is lights up when dimmer is
activated. When you set to turn off the display
completely, the MULTI CHANNEL DECODING
indicator is also turned off.
GB01COV_STR-DA3100ES-U.book Page 42 Monday, March 28, 2005 4:08 PM
