Sony SSC-SD26P Скачать руководство пользователя страница 3

O

u

tline

Features / Safety information

3

Outline

THIS APPARATUS MUST BE EARTHED.

To avoid electrical shock, do not open the 
cabinet. Refer servicing to qualified 
personnel only.

WARNING

This unit has no power switch.  
When installing the unit, incorporate a readily accessible disconnect 
device in the fixed wiring, or connect the power plug to an easily 
accessible socket-outlet near the unit. If a fault should occur during 
operation of the unit, operate the disconnect device to switch the power 
supply off, or disconnect the power plug.

WARNING

This is a Class A product. In a domestic environment, this product may 
cause radio interference in which case the user may be required to take 
adequate measures.
In the case that interference should occur, consult your nearest authorized 
Sony service facility.
This apparatus shall not be used in the residential area.

The electromagnetic fields at specific frequencies may influence the 
picture of this unit.

This installation should be made by a qualified service person and should 
conform to all local codes.

The nameplate is located inside the unit.

You are cautioned that any changes or modifications not expressly approved 
in this manual could void your authority to operate this equipment.

Features

SSC-SD26P/36P is a color video camera, equipped with 
a 1/4 type CCD, zoom lens and quick 360° scanning 
function. It has following features:

Exwave HAD

TM

*

CCD high quality camera is utilized

High ratio zooming up to:
SSC-SD36P: 36x optical zooming combined with 12x 
digital zooming can achieve up to 432x zooming
SSC-SD26P: 26x optical zooming combined with 12x 
digital zooming can achieve up to 312x zooming

Day/Night function can be switched between color/
monochrome mode

ALARM OUT function

Wide (120x standard) dynamic range DynaView

TM

**

 

technology (wider than normal for 128 times) is 
adopted

PRIVACY ZONE function

540-line, high resolution

360° high speed rotation, horizontal speed up to 
430°/s

Suitable for –40-50 in all weather conditions

IP66*** sealing housing rigid, and rain/wind-resistant 
suitable for outdoor installation

Line lock sync function by AC power supply (50Hz)

209 preset points

External control is performed by RS-485

Settings can be performed using the screen menu

* Exwave HAD

TM

 is the trademark of Sony 

Corporation.

** DynaView

TM

 is the trademark of Sony Corporation.

*** IP66 is the protection level provided by JIS and IEC.

Safety information

Read this Instruction Manual: before using the 
product, please carefully read through the safety 
information and operation instructions.

Keep this Instruction Manual: safely store the 
Instruction Manual for future reference.

Take note of the “Caution” labels: please follow the 
“Caution” labels on the product and Instruction 
Manual to ensure operation safety.

Follow instructions: when operating the unit, please 
follow instructions on the Instruction Manual.

Cleaning: before cleaning the unit, please first unplug 
the power.

Peripheral/accessories: do not place the unit on an 
unstable cart, tripod or tabletop as personal injury and 
damage to the unit may occur due to a fall. Please use 
officially-certified support, frames, and accessories 
included with the product. Follow the instructions in 
this Instruction Manual during installation to ensure 
performance and safety.

Ventilation: install the unit in a well-ventilated place, 
otherwise the humidification or vapor may damage 
internal parts.

Power: please observe the labeled specifications on the 
unit and power supply, and use the correct voltage. If 
unsure of the actual power requirements, contact the 
distributor before connecting the power.

Power cable: the power cable must be properly 
secured as improper connections may cause a short 
circuit, fire hazards, or serious damage and hazards.

Lightning strike: during prolonged inactivity, please 
unplug the power cable and the video cable to avoid 
damage from a lightning strike and power surges.

Foreign objects and fluids: do not insert any objects 
into the unit, or spill liquids, which will likely cause a 
short-circuit, especially when the transparent housing 
is separated from the main unit to avoid short circuits.

WARNING

ATTENTION

CAUTION

CAUTION

CAUTION

Содержание SSC-SD26P









































Отзывы: