Sony SRXT615, Руководство по эксплуатации

Страница: 13 / 30

13
Connecting the Projection Source Device
Pr
epa
ra
tio
n
Connecting to the RS-232C
Connector
Use a connection cable (not supplied) to connect the
RS-232C connector on the projector to the RS-232C
connector on the controller PC.
Connecting the
Projection Source Device
Notes on connection
• Perform connections for devices with their breakers off
or with their power cords disconnected.
• Use appropriate connection cables based on each of the
connectors.
• Fully insert all plugs. Incomplete connections may result
in image distortion. Be sure to grasp the plug portions
when performing disconnections.
• As an additional reference, refer to the operating
instructions of the device you want to connect.
For details on supported signals, “HDMI signals”
(page 29).
Connect the HDMI IN 1/2 connector on the projector to a
device equipped with HDMI output, such as a computer or
Blu-ray Disc player.
to RS-232C
connector
Connection cable (crossover cable)
(not supplied)
to RS-232C
connector
Controller PC
to HDMI IN 1
connector
to HDMI IN
2 connector
HDMI connection
cable (not supplied)
Computer Blu-ray Disc
player, etc.
to HDMI output
connector
to HDMI output
connector