63
Input Signals And Adjustable/Setting Items
Cha
pte
r 4
A
djus
tment
s a
nd Se
tting
s Us
ing t
he SRX
Con
tro
ller
Lamp Power
: You can reduce the lamp power to a value
from 50% to 100% in increments of 1% using the
or
button.
Luminance Value
: The value is referred to when your
Sony service representative performs axis
adjustments after replacing the lamp.
Switching the lamp output frequently may reduce the lamp
life. Use of the defined lamp output is recommended.
TEST PATTERN
Displays a built-in test pattern on the screen for adjusting
the picture with no signal input from external equipment.
Click the radio button of the desired test pattern from
among [Cross Hatch], [Cross Hatch (Invert)], [Checker
Flag] and [Test mode 1 (all white)]. When you do not
display a built-in test pattern, click the [Off] radio button.
• While a built-in test pattern is displayed on the screen,
you cannot switch the INPUT SELECT radio button,
and cannot adjust the PICTURE CONTROL.
• [Single 3D] is used for projecting a 3D image. For
details, contact your dealer or your local Sony
representative.
SINGLE 3D ADJUST
Used to project a 3D image.
For details, contact your dealer or your local Sony
representative.
Input Signals And
Adjustable/Setting Items
Some items of [Signal Adjust] in the PICTURE
CONTROL window and [Frame Adjust] in the COLOR/
FRAME window are not adjusted or set depending on the
input signals. Items that cannot be adjusted depending on
the input signal are not displayed in the window.
Signal Adjust
z
: Adjustable/can be set
–: Not adjustable/cannot be set
Frame Adjust
z
: Adjustable/can be set
–: Not adjustable/cannot be set
Note
Notes
Item
Input signal
HD-SDI
DVI-D
HDMI
4K
Contrast
z
z
z
z
Brightness
z
z
z
z
Color
z
–
z
–
Sharpness
z
–
–
–
Item
Input signal
HD-SDI
DVI-D
HDMI
4K
Dot Phase
–
–
–
–
H Size
–
–
–
–
H Shift
z
z
–
–
V Shift
z
z
–
–
