18
To check ingested DCP
Ingested DCP can be checked in the “Library” screen’s
[Local Folder] list.
Select [DCP] to display DCP ingested to the server in a list
in the [Current Auditorium] pane.
The following operations are available for each button in
the [Local Folder] list.
[Edit]:
The name of the selected DCP can be changed.
[Details]:
Detailed information on the selected DCP will
be displayed.
[Delete]:
The selected DCP can be deleted.
Tip
To refresh the displayed content, tap
.
Ingesting from HDD via CRU
DATAPORT
A CRU DATAPORT carrier is necessary to use the CRU
DATAPORT. For further details, contact qualified Sony
service personnel.
1
Insert the HDD containing DCP to the server’s CRU
DATAPORT.
2
For further instructions, follow steps
2
to
6
in
“Ingesting from HDD via USB Connector” (page 16)
to ingest DCP.
In step
3
and
6
, select [Ingest_SATA] in the [External
Folder] pane.
To remove the HDD
Perform the following to remove the HDD.
1
Press the power button.
The LED blinks for a moment and then turns off.
2
Verify that the LED is off, push the left side of the
handle, and remove the HDD.
Ingesting via Network
DCP stored on another server can be ingested via network.
Caution
To ingest DCP via network, it is necessary to register the
source device ahead of time.
For further details, refer to the “Installation Manual.”
To ingest DCP, follow steps
2
to
5
via USB Connector” (page 16).
In step
3
, select the source device in the [External Folder]
pane.
1
2