Sony SRW-9000, Руководство по эксплуатации

Страница: 58 / 207

Setting the Camera Outputs 58
Chap
ter
3
Ba
s
ic
Ad
jus
tme
nt
s
an
d Set
tings
To compare the playback and camera
pictures
When PB (playback signal output mode) is set to
AUTO, you can set PB MIX to ON to display the
playback picture and the camera picture in the
same screen.
You can change the PB MIX setting separately
for the VF/VBS and MON to turn playback signal
mixing on and off. The setting for both VF and
VBS is the same. When it is turned on, the
playback picture and camera output are mixed.
You can also use the <PB MIX SETTING> page
of the Camera >USER (OPERATION) menu to
select the playback picture and camera picture
display modes.
MIX TYPE
Select how to display the playback and camera
pictures.
MIX
When MIX TYPE is set to MIX, how to mix the
pictures can be selected.
WIPE
When MIX TYPE is set to WIPE, you can select
how pictures are to be wiped.
Setting Function
AUTO Normally, the camera picture is output.
When the unit enters playback mode
(PLAY, FF, REW, or REC REVIEW),
the playback picture is automatically
selected (default).
CAM The camera picture is always output.
Setting How to display
MIX The playback picture and camera image
are overlapped (default).
WIPE The screen is horizontally or vertically
split in two, and two pictures are
displayed simultaneously.
<PB MIX SETTING> page
I tem Setting Content
DIRECTION CAM The playback picture
is gradually mixed
into the camera image
(default).
PB The camera image is
gradually mixed into
the playback picture.
MODE Y-MIX The Y signals are
mixed (default).
WIRE(W) Only the outline
components are
mixed and displayed
with white lines.
WIRE(B) Only the outline
components are
mixed and displayed
with black lines.
LEVEL 0 to 80% The mix level can be
adjusted (default:
80%).
Item Setting Content
LAYOUT HOR Horizontally split
(default)
VERT Vertically split