Personal Audio System
SRS-X11
Charging the speaker from an AC outlet
The speaker contains a rechargeable lithium ion battery which should be charged before using the speaker for the first
time.
1. Make sure that the speaker is turned off.
2. Connect the micro-USB cable (supplied) to the speaker, then connect the other end to a USB AC adaptor (not
supplied).
3. Plug the USB AC adaptor to an AC outlet.
The CHARGE indicator lights up in orange while charging. The estimated charging time depends on the power
output capacity of the connected USB AC adaptor. For details on your USB AC adaptor’s power output, refer to the
operating instructions supplied with your USB AC adaptor. The time stated below may vary depending on the
ambient temperature or conditions of use.
It would take about four hours
*1
if the connected USB AC adaptor has ability to output in 1.5 A.
It would take about eight hours
*1
if the connected USB AC adaptor has ability to output in 500 mA.
The CHARGE indicator will turn off when charging has ended.
If the CHARGE indicator stays turned off when the speaker power is off and connected to an AC outlet, the built-in
lithium ion battery is fully charged. Once the battery is fully charged, it will not be charged furthermore even if the
speaker is kept connected to an AC outlet.
*1
Time that is required to charge the empty battery to its full capacity.
Battery life (when using the BLUETOOTH connection)
About 12 hours
*2
.
How to Use
43
