Personal Audio System
SRS-X11
Charging the speaker from a computer
The speaker contains a rechargeable lithium ion battery which should be charged before using the speaker for the first
time.
1. Make sure that the speaker is turned off.
2. Connect the micro-USB cable (supplied) to the speaker, then connect the other end to a booted computer.
The CHARGE indicator lights up in orange while charging. The estimated charging time depends on the power
output capacity of the connected PC. For details on your PC’s power output, refer to the operating instructions
supplied with your PC. The time stated below may vary depending on the ambient temperature or conditions of use.
It would take about four hours
*1
if the connected PC has ability to output in 1.5 A.
It would take about eight hours
*1
if the connected PC has ability to output in 500 mA.
The CHARGE indicator will turn off when charging has ended.
If the CHARGE indicator stays turned off when the speaker power is off and connected to a booted computer, the
built-in lithium ion battery is fully charged. Once the battery is fully charged, it will not be charged furthermore even
if the speaker is kept connected to a booted computer.
*1
Time that is required to charge the empty battery to its full capacity.
Battery life (when using the BLUETOOTH connection)
About 12 hours
*2
.
The time stated above may vary depending on the ambient temperature or conditions of use.
*2
The method of estimating the battery life has been changed since 2015.
When the battery is running low
How to Use
41