Sony SRR1000, Руководство по эксплуатации

Страница: 62 / 93

62
Detailed Menu Description
C
h
a
p
te
r 5
M
e
nu
It
em
s
SETUP Menu
Button Indication Setting Target
[F1]
USER BANK Saves or recalls menu settings. (see page 52) Unit
[F1] SYSTEM RECALL Recalls overall unit settings from the user banks. Unit
[F2]
PB PORT RECALL Recalls output port settings from the user banks. Out
[F3] REC PORT
RECALL
Recalls input port settings from the user banks. In
[F4]
SYSTEM SAVE Stores overall unit settings in the user banks. Unit
[F5] PB PORT SAVE Stores output port settings in the user banks. Out
[F6]
REC PORT SAVE Stores input port settings in the user banks. In
[F10] EXIT Redisplays the previous menu. –
[F2]
PANEL SETTING Sets the settings for panel operation. Unit
[F1] BEEP KEY Turns on or off the click sound emitted during panel operation.
On
Off
Unit
[F2]
BEEP ALARM Turns on or off the alarm sound when an error occurs.
On
Off
Unit
[F3]
REF ALRM Sets whether to display a warning when the video/audio reference signal selected in
REF SEL is not present or not in sync with the video input signal.
On
Off
Unit
[F4] STOP REC Selects method to stop recording from the control panel.
Simple: Stops recording when the STOP button is pressed.
w/ Shift: Stops recording when the STOP button is pressed while holding down the
SFT button in the numeric keypad.
Unit
[F7]
DISPLAY SETTING Sets the settings for the display. Unit
[F1] DIMMER Adjusts the brightness of the display backlight.
Level 1 to Level 3 to Level 5
Unit
[F3] WARN Sets whether to popup warning messages.
Off
On
Unit
[F6] RESIDUAL Sets what to display in the remaining amount indication for the SRMemory card.
Time: Displays the remaining recording time. (Times that are under 10 hours are
displayed in minutes, and times that are 10 hours or more are displayed in
hours.)
Capacity: Displays the remaining amount of memory.
Ratio: Displays the remaining amount as a ratio.
Unit
[F10]
EXIT Redisplays the previous menu. –
[F10] EXIT Redisplays the previous menu. –
[F3]
LOCAL KEY
ENABLE
Sets the buttons that can be operated on the control panel for when remote control
mode is enabled for all the ports.
Disable: Disables all switches and buttons.
Enable: Enables all switches and buttons.
Stop: Enables only the STOP button.
Lcl map (Local Key Map): Enables the buttons set to Enable in [F4] (MAP).
Unit