TC Setup Menu
63
Chap
te
r 5
Men
u Det
ail
s
CHAR
Settings related to the
text information
superimposed on the
output from the HD
SDI OUT (MON)
connector
Note
During SINGLE
LINK output,
information is output
to HD SDI OUT
(MON) 2 and not HD
SDI OUT (MON) 1.
ON/OFF
Sets whether or not to output text information.
ON [On]:
Outputs.
OFF [Off]: Does not output.
3D CHAR
Sets the output for displaying text information when the
system is set to 3D mode and SDI OUT is set to 1.5G
Single.
OUT1 [Out1]: Displays in HD SDI OUT (MON)
connector 1.
OUT2 [Out2]:
Displays in HD SDI OUT (MON)
connector 2.
OUT1+2 [Out1+2]: Displays in HD SDI OUT (MON)
connector 1/2.
HPOS
Sets the display position of text information in the
horizontal direction.
0 to 15 (
8
)
VPOS
Sets the display position of text information in the vertical
direction.
0 to 23 (
21
)
TYPE
Selects the character type.
W/O [Without BG]: White characters with no
background.
OUTL [Outline]: White characters with black outlines.
TRNS [Translucent]: White characters on a gray screen
background.
BG [With BG]
: White characters on a black background
SIZE
Sets the size of text information.
x1 [x1]: Normal
x2 [x2]:
Twice normal size
MODE
Sets the content of text information.
+STAT [Time + Status]:
Time counter display
information and status (operation status) information
+UB [Time + User Bit]: Time counter display information
and user bit data
+VITC [Time + VITC]: Time counter display information
and VITC
TIME [Time Only]: Time counter display information
only
+TM1 [Time + TM1]: Time counter display information
and TM1 counter value
+TM2 [Time + TM2]: Time counter display information
and TM2 counter value
WARN
When MODE is set to other than “TIME,” selects whether
or not warning/error messages flash on the second line.
OFF [Off]: Does not display flashing messages.
ERR [Error]: Displays only flashing error messages.
W+E [Warn + Error]:
Displays both flashing warning
messages and error messages.
Setting Item
Settings
