Names of Parts
10
Chapt
er
1
Ov
er
vie
w
For detailed information on functions and usage, see
the pages indicated in brackets.
1.
Lid open/close button
2.
Tally indicator
Lights up during recording.
Flashes as a warning indication when an
error or problem has occurred.
3.
POWER (power supply) indicator
Lights up in green when power to the unit is
on.
4.
EJECT button
5.
SRMemory card slot
6.
Docking screws
7.
LID LOCK indicator
Lights up in orange when an SRMemory card
is mounted.
1.
AUDIO INPUT CH-1, CH-2 (analog audio
input channel 1, 2) connectors (3-pin XLR,
female) and input selection switches
Set the input selection switches as follows,
depending on the type and level of the input
audio.
LINE:
For line input
MIC:
For microphone input
MIC +48V ON:
For input from microphones
with external power supply
2.
EARPHONES jack (stereo mini jack) and
LEVEL knob
Adjusts the audio level.
A warning/alarm tone is also output via this
jack when an error is detected.
3.
TC IN (time code input) connector (BNC)
Connect to the time code output connector of
an external device such as a time code
generator or VTR. Use this connector when
locking the internal time code generator to
external time code.
4.
TC OUT (time code output) connector
(BNC)
Connect to the time code input connector of
an external device such as a time code reader
or VTR. Signal is supplied according to
setting made from TC Setup menu, OTHERS
>TC OUT.
5.
AUX IN (HD SDI embedded audio input)
connector (BNC)
Accepts audio input in up to 16 channels.
Names of Parts
Overall View
1
4
5
7
6
2 3
Left Side View
3
2
1
9
8
7
6
4 5
