Sony SRG-H40UH Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 54

Sony SRG-H40UH Скачать руководство пользователя страница 33

33

ZOOM/FOCUS Menu

The ZOOM/FOCUS menu is used to select the
zoom/focus mode.

ZOOM MODE

Select the zoom mode.

[OPTICAL]:

Zooms objects within the optical

zoom range (up to 20x) of the camera.

[CLEAR IMAGE ZOOM] (Clear Image Zoom):

An

image is zoomed with less deterioration of
image quality over the optical region.
Zooming is up to 1.5× when the video
output format is 4K, and up to 2× for other
formats.

[DIGITAL]:

An image can be zoomed up to 20×

optical zoom and 12× digital zoom
(including Clear Image Zoom) with up to a
total of 240× zoom.

FOCUS MODE

Select the focus mode.

[AUTO]:

The camera focuses automatically.

[MANUAL]:

You can focus manually. Adjust

using the supplied remote commander or
optional remote controller.

Notes

Select [MANUAL] and adjust the focus manually
when shooting the following objects.
• White walls and other objects without contrast
• Objects behind glass
• Objects with horizontal stripes
• Objects on which bright lights are cast or

reflected

• Nightscapes and other dark objects with

blinking lights

• Lit objects shot with darkened exposure

adjustment or exposure compensation
settings

PICTURE Menu

The PICTURE menu is used to adjust the picture
quality improvement features.

HIGH RESOLUTION

You can set [HIGH RESOLUTION] (High resolution
mode) to [ON] or [OFF]. When set to [ON], you
can enjoy emphasized edge and high-resolution
images.

Notes

• When set to [ON], image noise may increase

more than when set to [OFF].

• When [MODE] is set to [MANUAL] in [DETAIL],

the function is not available.

NOISE REDUCTION

You can obtain clearer images by removing
unnecessary noise (fixed pattern and
randomized noise) with [NOISE REDUCTION].
Choose from [OFF] or level 1 through level 5.
When you select [ADVANCED], you can set up [2D
NR LEVEL] and [3D NR LEVEL] independently.

2D NR LEVEL

This is enabled when [NOISE REDUCTION] is
[ADVANCED]. Choose from [OFF] or level [1]
through level [5] for noise reduction.

3D NR LEVEL

This is enabled when [NOISE REDUCTION] is
[ADVANCED]. Choose from [OFF] or level [1]
through level [5] for noise reduction.

FLICKER CANCEL

When this is turned [ON], the flicker correction
feature becomes enabled.
When this is turned [OFF], the flicker correction
feature becomes disabled.

Note

Depending on conditions such as the type of
illumination and shutter speed, the flicker
correction feature may not be effective.
If the frame rate is close to the power supply
frequency, the flicker correction feature may not
be able to fully remove flickers, even if it is

«
...
31
32
33
34
35
...
»

Содержание SRG-H40UH























































Отзывы:

Нет отзывов