Sony SPP-A972 - Cordless Telephone With Answering System страница 48 Скачать руководство пользователя

Страница: 48 / 80

Answering Machine Features

Setting up the answering machine (continued)

Tip

All the mailbox buttons (

(MAILBOX 1)

(MAILBOX 2)

and

(MAILBOX 3)

) work as

the

(PLAY/STOP)

button; press any of the three in this case.

To hear the current time

Press

(TIME/SET)

. The current time setting is announced.

Recording the greeting

You can record your own greeting for the “normal” and
“announcement only” modes (see page 56).

Press

(MENU)

repeatedly until

“Set out-going message” is
announced.

“- -” blinks on the display.

Press

(REC/MEMO)

“Now recording” is announced
and a long beep sounds.

Speak into the base unit
microphone (MIC). The display
starts counting. You can record
up to 90 seconds.

To stop recording, press

(PLAY/STOP)

Your greeting replays
automatically.

Notes

• If you do not record your own greeting, the prerecorded greeting will be

assigned automatically (see page 49).

• If your greeting is less than two seconds, the greeting is not recorded. The

prerecorded greeting will be assigned automatically.

• If a call comes in during recording, recording stops automatically.
• If 90 seconds have passed or memory becomes full in step 3, recording stops

automatically.

• “Memory full” is announced if no recording space is available when you

press

(REC/MEMO)

. Erase unnecessary messages (see page 55).

Tip

To record a greeting for the “announcement only” mode, select the
announcement only mode first (see page 56), then follow the instructions above.
Otherwise, the normal greeting will be recorded.

(ERASE)

MIC

Содержание SPP-A972 - Cordless Telephone With Answering System

















































































Результаты поиска

Содержание SPP-A972 - Cordless Telephone With Answering System

Отзывы:

Похожие инструкции для SPP-A972 - Cordless Telephone With Answering System

Бренды по названию

Популярные бренды

Sony SPP-A972 - Cordless Telephone With Answering System, Руководство по эксплуатации

Результаты поиска

Содержание SPP-A972 - Cordless Telephone With Answering System

Отзывы:

Похожие инструкции для SPP-A972 - Cordless Telephone With Answering System

Бренды по названию

Популярные бренды