Sony SPP-206, Руководство по эксплуатации

Страница: 15 / 64

Basics
15
EN
Basics
1
When you hear the phone ring:
• Press (TALK) (or any dialing
key).
or
• Pick up the handset from the
base phone when the handset is
placed on the base phone.
The TALK/BATT LOW lamp on
the handset and the LINE lamp on
the base phone light up.
2
When you are done talking, press
(OFF) or replace the handset on the
base phone.
The TALK/BATT LOW lamp on
the handset and the LINE lamp on
the base phone go off.
To
Put a call on hold
Switch to another call
(“call waiting” service*)
Turn on/off the ringer
Do this
Press (HOLD) .
The TALK/BATT LOW lamp flashes slowly.
Press
(TALK) to resume the conversation.
Press (FLASH) .
Press (FLASH) again to return to the first caller.
Press
(SPEED DIAL/PGM)
,
(#)
and
(1)
to turn the
ringer on, or (0) to turn it off.
Then press
(SPEED DIAL/PGM)
.
Set the RINGER switch to H (high), L (low) or OFF.
Additional tasks
Receiving calls
(FLASH)
TALK/BATT
LOW lamp
of the handset
Adjust the ringer volume of
the base phone
* Contact your telephone company to subscribe to this service.
(HOLD)
(0)
(1)
(#)
(SPEED DIAL/PGM)
VOL switch
Receiving calls through the speakerphone
When you hear the phone ring, press
(SPEAKERPHONE)
on the base phone.
The LINE lamp lights up.
To adjust the speaker volume, slide the
SPEAKER VOLUME control.
When you're done talking, press
(SPEAKERPHONE) again.
To obtain the best speakerphone
performance, see page 14.
(SPEAKERPHONE)
SPEAKER
VOLUME
control
LINE lamp
RINGER switch